You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
48 lines
1.4 KiB
Plaintext
48 lines
1.4 KiB
Plaintext
15 years ago
|
/*
|
||
|
|
Analog Input
|
||
|
|
Demonstrates analog input by reading an analog sensor on analog pin 0 and
|
||
|
|
turning on and off a light emitting diode(LED) connected to digital pin 13.
|
||
|
|
The amount of time the LED will be on and off depends on
|
||
|
|
the value obtained by analogRead().
|
||
|
|
|
||
|
|
The circuit:
|
||
|
|
* Potentiometer attached to analog input 0
|
||
|
|
* center pin of the potentiometer to the analog pin
|
||
|
|
* one side pin (either one) to ground
|
||
|
|
* the other side pin to +5V
|
||
|
|
* LED anode (long leg) attached to digital output 13
|
||
|
|
* LED cathode (short leg) attached to ground
|
||
|
|
|
||
|
|
* Note: because most Arduinos have a built-in LED attached
|
||
|
|
to pin 13 on the board, the LED is optional.
|
||
|
|
|
||
|
|
|
||
|
|
Created by David Cuartielles
|
||
|
|
Modified 16 Jun 2009
|
||
|
|
By Tom Igoe
|
||
|
|
|
||
|
|
http://arduino.cc/en/Tutorial/AnalogInput
|
||
|
|
|
||
|
|
*/
|
||
|
|
|
||
|
|
int sensorPin = 0; // select the input pin for the potentiometer
|
||
|
|
int ledPin = 13; // select the pin for the LED
|
||
|
|
int sensorValue = 0; // variable to store the value coming from the sensor
|
||
|
|
|
||
|
|
void setup() {
|
||
|
|
// declare the ledPin as an OUTPUT:
|
||
|
|
pinMode(ledPin, OUTPUT);
|
||
|
|
}
|
||
|
|
|
||
|
|
void loop() {
|
||
|
|
// read the value from the sensor:
|
||
|
|
sensorValue = analogRead(sensorPin);
|
||
|
|
// turn the ledPin on
|
||
|
|
digitalWrite(ledPin, HIGH);
|
||
|
|
// stop the program for <sensorValue> milliseconds:
|
||
|
|
delay(sensorValue);
|
||
|
|
// turn the ledPin off:
|
||
|
|
digitalWrite(ledPin, LOW);
|
||
|
|
// stop the program for for <sensorValue> milliseconds:
|
||
|
|
delay(sensorValue);
|
||
|
|
}
|