neingeist
/
arduinisten
Archived
1
0
Fork 0
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.

2754 lines
86 KiB
Plaintext

#
# Tabset Widget and the Tab Class
# ----------------------------------------------------------------------
# A Tabset is a widget that contains a set of Tab buttons.
# It displays these tabs in a row or column depending on it tabpos.
# When a tab is clicked on, it becomes the only tab in the tab set that
# is selected. All other tabs are deselected. The Tcl command prefix
# associated with this tab (through the command tab configure option)
# is invoked with the tab index number appended to its argument list.
# This allows the Tabset to control another widget such as a Notebook.
#
# A Tab class is an [incr Tcl] class that displays either an image,
# bitmap, or label in a graphic object on a canvas. This graphic object
# can have a wide variety of appearances depending on the options set.
#
# WISH LIST:
# This section lists possible future enhancements.
#
# 1) When too many tabs appear, a small scrollbar should appear to
# move the tabs over.
#
# ----------------------------------------------------------------------
# AUTHOR: Bill W. Scott EMAIL: bscott@spd.dsccc.com
#
# @(#) $Id: tabset.itk,v 1.7 2002/02/25 04:47:17 mgbacke Exp $
# ----------------------------------------------------------------------
# Copyright (c) 1995 DSC Technologies Corporation
# ======================================================================
# Permission to use, copy, modify, distribute and license this software
# and its documentation for any purpose, and without fee or written
# agreement with DSC, is hereby granted, provided that the above copyright
# notice appears in all copies and that both the copyright notice and
# warranty disclaimer below appear in supporting documentation, and that
# the names of DSC Technologies Corporation or DSC Communications
# Corporation not be used in advertising or publicity pertaining to the
# software without specific, written prior permission.
#
# DSC DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
# ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NON-
# INFRINGEMENT. THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, AND THE
# AUTHORS AND DISTRIBUTORS HAVE NO OBLIGATION TO PROVIDE MAINTENANCE,
# SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. IN NO EVENT SHALL
# DSC BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
# ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTUOUS ACTION,
# ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
# SOFTWARE.
# ======================================================================
#
# Default resources.
#
option add *Tabset.width 0 widgetDefault
option add *Tabset.height 0 widgetDefault
option add *Tabset.equalTabs true widgetDefault
option add *Tabset.tabPos s widgetDefault
option add *Tabset.raiseSelect false widgetDefault
option add *Tabset.start 4 widgetDefault
option add *Tabset.margin 5 widgetDefault
option add *Tabset.tabBorders true widgetDefault
option add *Tabset.bevelAmount 0 widgetDefault
option add *Tabset.padX 4 widgetDefault
option add *Tabset.padY 4 widgetDefault
option add *Tabset.gap overlap widgetDefault
option add *Tabset.angle 20 widgetDefault
option add *Tabset.font fixed widgetDefault
option add *Tabset.state normal widgetDefault
option add *Tabset.disabledForeground #a3a3a3 widgetDefault
option add *Tabset.foreground black widgetDefault
option add *Tabset.background #d9d9d9 widgetDefault
option add *Tabset.selectForeground black widgetDefault
option add *Tabset.selectBackground #ececec widgetDefault
#
# Usual options.
#
itk::usual Tabset {
keep -backdrop -background -cursor -disabledforeground -font -foreground \
-selectbackground -selectforeground
}
# ------------------------------------------------------------------
# TABSET
# ------------------------------------------------------------------
itcl::class iwidgets::Tabset {
inherit itk::Widget
constructor {args} {}
destructor {}
itk_option define -width width Width 0
itk_option define -equaltabs equalTabs EqualTabs true
itk_option define -height height Height 0
itk_option define -tabpos tabPos TabPos s
itk_option define -raiseselect raiseSelect RaiseSelect false
itk_option define -start start Start 4
itk_option define -margin margin Margin 5
itk_option define -tabborders tabBorders TabBorders true
itk_option define -bevelamount bevelAmount BevelAmount 0
itk_option define -padx padX PadX 4
itk_option define -pady padY PadY 4
itk_option define -gap gap Gap overlap
itk_option define -angle angle Angle 20
itk_option define -font font Font fixed
itk_option define -state state State normal
itk_option define \
-disabledforeground disabledForeground DisabledForeground #a3a3a3
itk_option define -foreground foreground Foreground black
itk_option define -background background Background #d9d9d9
itk_option define -selectforeground selectForeground Background black
itk_option define -backdrop backdrop Backdrop white
itk_option define -selectbackground selectBackground Foreground #ececec
itk_option define -command command Command {}
public method configure {args}
public method add {args}
public method delete {args}
public method index {index}
public method insert {index args}
public method prev {}
public method next {}
public method select {index}
public method tabcget {index args}
public method tabconfigure {index args}
public method bbox {}
protected method _selectName {tabName}
private method _createTab {args}
private method _deleteTabs {fromTab toTab}
private method _index {pathList index select}
private method _tabConfigure {args}
private method _relayoutTabs {}
private method _drawBevelBorder {}
private method _calcNextTabOffset {tabName}
private method _tabBounds {}
private method _recalcCanvasGeom {}
private method _canvasReconfigure {width height}
private method _startMove {x y}
private method _moveTabs {x y}
private method _endMove {x y}
private method _configRelayout {}
private variable _width 0 ;# Width of the canvas in screen units
private variable _height 0 ;# Height of the canvas in screen units
private variable _selectedTop 0 ;# top edge of tab + a margin
private variable _deselectedTop 0 ;# top edge of tab + a margin&raiseamt
private variable _selectedLeft 0 ;# left edge of tab + a margin
private variable _deselectedLeft 0 ;# left edge of tab + a margin&raiseamt
private variable _tabs {} ;# our internal list of tabs
private variable _currTab -1 ;# numerical index # of selected tab
private variable _uniqueID 0 ;# used to create unique names
private variable _cmdStr {} ;# holds value of itk_option(-command)
;# do not know why I need this!
private variable _canvasWidth 0 ;# set by canvasReconfigure, is can wid
private variable _canvasHeight 0 ;# set by canvasReconfigure, is can hgt
private variable _anchorX 0 ;# used by mouse scrolling methods
private variable _anchorY 0 ;# used by mouse scrolling methods
private variable _margin 0 ;# -margin in screen units
private variable _start 0 ;# -start in screen units
private variable _gap overlap ;# -gap in screen units
private variable _relayout false ;# flag tripped to tell whether to
;# relayout tabs after the configure
private variable _skipRelayout false ;# flag that tells whether to skip
;# relayouting out the tabs. used by
;# _endMove.
}
#
# Provide a lowercase access method for the Tabset class
#
proc ::iwidgets::tabset {pathName args} {
uplevel ::iwidgets::Tabset $pathName $args
}
# ----------------------------------------------------------------------
# CONSTRUCTOR
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::constructor {args} {
global tcl_platform
#
# Create the canvas that holds the tabs
#
itk_component add canvas {
canvas $itk_interior.canvas -highlightthickness 0
} {
keep -cursor -width -height
}
pack $itk_component(canvas) -fill both -expand yes -anchor nw
# ... This gives us a chance to redraw our bevel borders, etc when
# the size of our canvas changes...
bind $itk_component(canvas) <Configure> \
[itcl::code $this _canvasReconfigure %w %h]
bind $itk_component(canvas) <Map> \
[itcl::code $this _relayoutTabs]
# ... Allow button 2 scrolling as in label widget.
if {$tcl_platform(os) != "HP-UX"} {
bind $itk_component(canvas) <2> \
[itcl::code $this _startMove %x %y]
bind $itk_component(canvas) <B2-Motion> \
[itcl::code $this _moveTabs %x %y]
bind $itk_component(canvas) <ButtonRelease-2> \
[itcl::code $this _endMove %x %y]
}
# @@@
# @@@ Is there a better way?
# @@@
bind $itk_component(hull) <Tab> [itcl::code $this next]
bind $itk_component(hull) <Shift-Tab> [itcl::code $this prev]
eval itk_initialize $args
_configRelayout
_recalcCanvasGeom
}
itcl::body iwidgets::Tabset::destructor {} {
foreach tab $_tabs {
itcl::delete object $tab
}
}
# ----------------------------------------------------------------------
# OPTIONS
# ----------------------------------------------------------------------
# ----------------------------------------------------------------------
# OPTION -width
#
# Sets the width explicitly for the canvas of the tabset
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::width {
if {$itk_option(-width) != {}} {
}
set _width [winfo pixels $itk_interior $itk_option(-width)]
}
# ----------------------------------------------------------------------
# OPTION -equaltabs
#
# If set to true, causes horizontal tabs to be equal in
# in width and vertical tabs to equal in height.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::equaltabs {
if {$itk_option(-equaltabs) != {}} {
set _relayout true
}
}
# ----------------------------------------------------------------------
# OPTION -height
#
# Sets the height explicitly for the canvas of the tabset
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::height {
set _height [winfo pixels $itk_interior $itk_option(-height)]
}
# ----------------------------------------------------------------------
# OPTION -tabpos
#
# Sets the tab position of tabs, n, s, e, w
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::tabpos {
if {$itk_option(-tabpos) != {}} {
switch $itk_option(-tabpos) {
n {
_tabConfigure -invert true -orient horizontal
}
s {
_tabConfigure -invert false -orient horizontal
}
w {
_tabConfigure -invert false -orient vertical
}
e {
_tabConfigure -invert true -orient vertical
}
default {
error "bad anchor position\
\"$itk_option(-tabpos)\" must be n, s, e, or w"
}
}
}
}
# ----------------------------------------------------------------------
# OPTION -raiseselect
#
# Sets whether to raise selected tabs slightly
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::raiseselect {
if {$itk_option(-raiseselect) != {}} {
set _relayout true
}
}
# ----------------------------------------------------------------------
# OPTION -start
#
# Sets the offset to start of tab set
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::start {
if {$itk_option(-start) != {}} {
set _start [winfo pixels $itk_interior $itk_option(-start)]
set _relayout true
} else {
set _start 4
}
}
# ----------------------------------------------------------------------
# OPTION -margin
#
# Sets the margin used above n tabs, below s tabs, left of e
# tabs, right of w tabs
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::margin {
if {$itk_option(-margin) != {}} {
set _margin [winfo pixels $itk_interior $itk_option(-margin)]
set _relayout true
} else {
set _margin 5
}
}
# ----------------------------------------------------------------------
# OPTION -tabborders
#
# Boolean that specifies whether to draw the borders of
# the unselected tabs (tabs in background)
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::tabborders {
if {$itk_option(-tabborders) != {}} {
_tabConfigure -tabborders $itk_option(-tabborders)
}
}
# ----------------------------------------------------------------------
# OPTION -bevelamount
#
# Specifies pixel size of tab corners. 0 means no corners.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::bevelamount {
if {$itk_option(-bevelamount) != {}} {
_tabConfigure -bevelamount $itk_option(-bevelamount)
}
}
# ----------------------------------------------------------------------
# OPTION -padx
#
# Sets the padding in each tab to the left and right of label
# I don't convert for fpixels, since Tab does it for me.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::padx {
if {$itk_option(-padx) != {}} {
_tabConfigure -padx $itk_option(-padx)
}
}
# ----------------------------------------------------------------------
# OPTION -pady
#
# Sets the padding in each tab to the left and right of label
# I don't convert for fpixels, since Tab does it for me.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::pady {
if {$itk_option(-pady) != {}} {
_tabConfigure -pady $itk_option(-pady)
}
}
# ----------------------------------------------------------------------
# OPTION -gap
#
# Sets the amount of spacing between tabs in pixels
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::gap {
if {$itk_option(-gap) != {}} {
if {$itk_option(-gap) != "overlap"} {
set _gap [winfo pixels $itk_interior $itk_option(-gap)]
} else {
set _gap overlap
}
set _relayout true
} else {
set _gap overlap
}
}
# ----------------------------------------------------------------------
# OPTION -angle
#
# Sets the angle of the tab's sides
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::angle {
if {$itk_option(-angle) != {}} {
_tabConfigure -angle $itk_option(-angle)
}
}
# ----------------------------------------------------------------------
# OPTION -font
#
# Sets the font of the tab (SELECTED and UNSELECTED)
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::font {
if {$itk_option(-font) != {}} {
_tabConfigure -font $itk_option(-font)
}
}
# ----------------------------------------------------------------------
# OPTION -state
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::state {
if {$itk_option(-state) != {}} {
_tabConfigure -state $itk_option(-state)
}
}
# ----------------------------------------------------------------------
# OPTION -disabledforeground
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::disabledforeground {
if {$itk_option(-disabledforeground) != {}} {
_tabConfigure \
-disabledforeground $itk_option(-disabledforeground)
}
}
# ----------------------------------------------------------------------
# OPTION -foreground
#
# Sets the foreground label color of UNSELECTED tabs
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::foreground {
_tabConfigure -foreground $itk_option(-foreground)
}
# ----------------------------------------------------------------------
# OPTION -background
#
# Sets the background color of UNSELECTED tabs
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::background {
if {$itk_option(-background) != {}} {
_tabConfigure -background $itk_option(-background)
} else {
_tabConfigure -background \
[$itk_component(canvas) cget -background]
}
}
# ----------------------------------------------------------------------
# OPTION -selectforeground
#
# Sets the foreground label color of SELECTED tabs
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::selectforeground {
_tabConfigure -selectforeground $itk_option(-selectforeground)
}
# ----------------------------------------------------------------------
# OPTION -backdrop
#
# Sets the background color of the Tabset backdrop (behind the tabs)
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::backdrop {
if {$itk_option(-backdrop) != {}} {
$itk_component(canvas) configure \
-background $itk_option(-backdrop)
}
}
# ----------------------------------------------------------------------
# OPTION -selectbackground
#
# Sets the background color of SELECTED tabs
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::selectbackground {
if {$itk_option(-selectbackground) != {}} {
} else {
#set _selectBackground \
[$itk_component(canvas) cget -background]
}
_tabConfigure -selectbackground $itk_option(-selectbackground)
}
# ----------------------------------------------------------------------
# OPTION -command
#
# The command to invoke when a tab is hit.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tabset::command {
if {$itk_option(-command) != {}} {
set _cmdStr $itk_option(-command)
}
}
# ----------------------------------------------------------------------
# METHOD: add ?option value...?
#
# Creates a tab and appends it to the list of tabs.
# processes tabconfigure for the tab added.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::add {args} {
set tabName [eval _createTab $args]
lappend _tabs $tabName
_relayoutTabs
return $tabName
}
# ----------------------------------------------------------------------
# METHOD: configure ?option? ?value option value...?
#
# Acts as an addendum to the itk::Widget::configure method.
#
# Checks the _relayout flag to see if after configures are done
# we need to relayout the tabs.
#
# _skipRelayout is set in the MB2 scroll methods, to avoid constant
# relayout of tabs while dragging the mouse.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::configure {args} {
set result [eval itk::Archetype::configure $args]
_configRelayout
return $result
}
itcl::body iwidgets::Tabset::_configRelayout {} {
# then relayout tabs if necessary
if { $_relayout } {
if { $_skipRelayout } {
} else {
_relayoutTabs
}
set _relayout false
}
}
# ----------------------------------------------------------------------
# METHOD: delete index1 ?index2?
#
# Deletes a tab or range of tabs from the tabset
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::delete {args} {
if { $_tabs == {} } {
error "can't delete tabs,\
no tabs in the tabset named $itk_component(hull)"
}
set len [llength $args]
switch $len {
0 {
error "wrong # args: should be\
\"$itk_component(hull) delete index1 ?index2?\""
}
1 {
set fromTab [index [lindex $args 0]]
if { $fromTab == -1 } {
error "bad value for index1:\
[lindex $args 0] in call to delete"
}
set toTab $fromTab
_deleteTabs $fromTab $toTab
}
2 {
set fromTab [index [lindex $args 0]]
if { $fromTab == -1 } {
error "bad value for index1:\
[lindex $args 0] in call to delete"
}
set toTab [index [lindex $args 1]]
if { $toTab == -1 } {
error "bad value for index2:\
[lindex $args 1] in call to delete"
}
_deleteTabs $fromTab $toTab
}
default {
error "wrong # args: should be\
\"$itk_component(hull) delete index1 ?index2?\""
}
}
}
# ----------------------------------------------------------------------
# METHOD: index index
#
# Given an index identifier returns the numeric index of the tab
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::index {index} {
return [_index $_tabs $index $_currTab]
}
# ----------------------------------------------------------------------
# METHOD: insert index ?option value...?
#
# Inserts a tab before a index. The before tab may
# be specified as a label or a tab position.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::insert {index args} {
if { $_tabs == {} } {
error "no tab to insert before,\
tabset '$itk_component(hull)' is empty"
}
# get the tab
set tab [index $index]
# catch bad value for before tab.
if { $tab < 0 || $tab >= [llength $_tabs] } {
error "bad value $tab for index:\
should be between 0 and [expr {[llength $_tabs] - 1}]"
}
# create the new tab and get its name...
set tabName [eval _createTab $args]
# grab the name of the tab currently selected. (to keep in sync)
set currTabName [lindex $_tabs $_currTab]
# insert tabName before $tab
set _tabs [linsert $_tabs $tab $tabName]
# keep the _currTab in sync with the insert.
set _currTab [lsearch -exact $_tabs $currTabName]
_relayoutTabs
return $tabName
}
# ----------------------------------------------------------------------
# METHOD: prev
#
# Selects the prev tab. Wraps at first back to last tab.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::prev {} {
if { $_tabs == {} } {
error "can't goto previous tab,\
no tabs in the tabset: $itk_component(hull)"
}
# bump to the previous tab and wrap if necessary
set prev [expr {$_currTab - 1}]
if { $prev < 0 } {
set prev [expr {[llength $_tabs] - 1}]
}
select $prev
}
# ----------------------------------------------------------------------
# METHOD: next
#
# Selects the next tab. Wraps at last back to first tab.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::next {} {
if { $_tabs == {} } {
error "can't goto next tab,\
no tabs in the tabset: $itk_component(hull)"
}
# bump to the next tab and wrap if necessary
set next [expr {$_currTab + 1}]
if { $next >= [llength $_tabs] } {
set next 0
}
select $next
}
# ----------------------------------------------------------------------
# METHOD: select index
#
# Select a tab by index
#
# Lowers the last _currTab if it existed.
# Then raises the new one if it exists.
#
# Returns numeric index of selection, -1 if failed.
# -------------------------------------------------------------
itcl::body iwidgets::Tabset::select {index} {
if { $_tabs == {} } {
error "can't activate a tab,\
no tabs in the tabset: $itk_component(hull)"
}
# if there is not current selection just ignore trying this selection
if { $index == "select" && $_currTab == -1 } {
return -1
}
# is selection request in range ?
set reqTab [index $index]
if { $reqTab == -1 } {
error "bad value $index for index:\
should be from 0 to [expr {[llength $_tabs] - 1}]"
}
# If already selected then ignore and return...
if { $reqTab == $_currTab } {
return $reqTab
}
# ---- Deselect
if { $_currTab != -1 } {
set currTabName [lindex $_tabs $_currTab]
$currTabName deselect
# handle different orientations...
if { $itk_option(-tabpos) == "n" || $itk_option(-tabpos) == "s"} {
$currTabName configure -top $_deselectedTop
} else {
$currTabName configure -left $_deselectedLeft
}
}
# get the stacking order correct...
foreach tab $_tabs {
$tab lower
}
# set this now so that the -command cmd can do an 'index select'
# to operate on this tab.
set _currTab $reqTab
# ---- Select
set reqTabName [lindex $_tabs $reqTab]
$reqTabName select
if { $itk_option(-tabpos) == "n" || $itk_option(-tabpos) == "s"} {
$reqTabName configure -top $_selectedTop
} else {
$reqTabName configure -left $_selectedLeft
}
set _currTab $reqTab
# invoke any user command string, appended with tab index number
if { $_cmdStr != {} } {
set newCmd $_cmdStr
eval [lappend newCmd $reqTab]
}
return $reqTab
}
# ----------------------------------------------------------------------
# METHOD: tabcget index ?option?
#
# Returns the value for the option setting of the tab at index $index.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::tabcget {index args} {
return [lindex [eval tabconfigure $index $args] 2]
}
# ----------------------------------------------------------------------
# METHOD: tabconfigure index ?option? ?value option value?
#
# tabconfigure index : returns configuration list
# tabconfigure index -option : returns option values
# tabconfigure index ?option value option value ...? sets options
# and returns empty string.
#
# Performs configure on a given tab denoted by index.
#
# Index may be a tab number or a pattern matching the label
# associated with a tab.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::tabconfigure {index args} {
# convert index to numeric
set tab [index $index]
if { $tab == -1 } {
error "bad index value:\
$index for $itk_component(hull) tabconfigure"
}
set tabName [lindex $_tabs $tab]
set len [llength $args]
switch $len {
0 {
return [eval $tabName configure]
}
1 {
return [eval $tabName configure $args]
}
default {
eval $tabName configure $args
_relayoutTabs
select select
}
}
return ""
}
# ----------------------------------------------------------------------
# METHOD: bbox
#
# calculates the bounding box that will completely enclose
# all the tabs.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::bbox {} {
return [_tabBounds]
}
# ----------------------------------------------------------------------
# PROTECTED METHOD: _selectName
#
# internal method to allow selection by internal tab name
# rather than index. This is used by the bind methods
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_selectName {tabName} {
# if the tab is disabled, then ignore this selection...
if { [$tabName cget -state] == "disabled" } {
return
}
set tab [lsearch -exact $_tabs $tabName]
select $tab
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _createTab
#
# Creates a tab, using unique tab naming, propagates background
# and keeps unique id up to date.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_createTab {args} {
#
# create an internal name for the tab: tab0, tab1, etc.
# these are one-up numbers they do not
# correspond to the position the tab is located in.
#
set tabName $this-tab$_uniqueID
switch $itk_option(-tabpos) {
n {
set invert true
set orient horizontal
set x 0
set y [expr {$_margin + 1}]
}
s {
set invert false
set orient horizontal
set x 0
set y 0
}
w {
set invert false
set orient vertical
set x 0
set y 0
}
e {
set invert true
set orient vertical
set x [expr {$_margin + 1}]
set y 0
}
default {
error "bad anchor position\
\"$itk_option(-tabpos)\" must be n, s, e, or w"
}
}
eval iwidgets::Tab $tabName $itk_component(canvas) \
-left $x \
-top $y \
-font [list $itk_option(-font)] \
-background $itk_option(-background) \
-foreground $itk_option(-foreground) \
-selectforeground $itk_option(-selectforeground) \
-disabledforeground $itk_option(-disabledforeground) \
-selectbackground $itk_option(-selectbackground) \
-angle $itk_option(-angle) \
-padx $itk_option(-padx) \
-pady $itk_option(-pady) \
-bevelamount $itk_option(-bevelamount) \
-state $itk_option(-state) \
-tabborders $itk_option(-tabborders) \
-invert $invert \
-orient $orient \
$args
$tabName lower
$itk_component(canvas) \
bind $tabName <Button-1> [itcl::code $this _selectName $tabName]
incr _uniqueID
return $tabName
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _deleteTabs
#
# Deletes tabs from $fromTab to $toTab.
#
# Operates in two passes, destroys all the widgets
# Then removes the pathName from the tab list
#
# Also keeps the current selection in bounds.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_deleteTabs {fromTab toTab} {
for { set tab $fromTab } { $tab <= $toTab } { incr tab } {
set tabName [lindex $_tabs $tab]
# unbind Button-1 from this window name
$itk_component(canvas) bind $tabName <Button-1> {}
# Destroy the Tab class...
itcl::delete object $tabName
}
# physically remove the tab
set _tabs [lreplace $_tabs $fromTab $toTab]
# If we deleted a selected tab set our selection to none
if { $_currTab >= $fromTab && $_currTab <= $toTab } {
set _currTab -1
_drawBevelBorder
}
# make sure _currTab stays in sync with new numbering...
if { $_tabs == {} } {
# if deleted only remaining tab,
# reset current tab to undefined
set _currTab -1
# or if the current tab was the last tab, it needs come back
} elseif { $_currTab >= [llength $_tabs] } {
incr _currTab -1
if { $_currTab < 0 } {
# but only to zero
set _currTab 0
}
}
_relayoutTabs
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _index
#
# pathList : list of path names to search thru if index is a label
# index : either number, 'select', 'end', or pattern
# select : current selection
#
# _index takes takes the value $index converts it to
# a numeric identifier. If the value is not already
# an integer it looks it up in the $pathList array.
# If it fails it returns -1
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_index {pathList index select} {
switch $index {
select {
set number $select
}
end {
set number [expr {[llength $pathList] -1}]
}
default {
# is it an number already?
if { [regexp {^[0-9]+$} $index] } {
set number $index
if { $number < 0 || $number >= [llength $pathList] } {
set number -1
}
# otherwise it is a label
} else {
# look thru the pathList of pathNames and
# get each label and compare with index.
# if we get a match then set number to postion in $pathList
# and break out.
# otherwise number is still -1
set i 0
set number -1
foreach pathName $pathList {
set label [$pathName cget -label]
if { $label == $index } {
set number $i
break
}
incr i
}
}
}
}
return $number
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _tabConfigure
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_tabConfigure {args} {
foreach tab $_tabs {
eval $tab configure $args
}
set _relayout true
if { $_tabs != {} } {
select select
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _relayoutTabs
#
# relays out the tabs with correct spacing...
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_relayoutTabs {} {
if { [llength $_tabs] == 0 || ![winfo viewable $itk_component(hull)]} {
return
}
# get the max width for fixed width tabs...
set maxWidth 0
foreach tab $_tabs {
set width [$tab labelwidth]
if { $width > $maxWidth } {
set maxWidth $width
}
}
# get the max height for fixed height tabs...
set maxHeight 0
foreach tab $_tabs {
set height [$tab labelheight]
if { $height > $maxHeight } {
set maxHeight $height
}
}
# get curr tab's name
set currTabName [lindex $_tabs $_currTab]
# Start with our margin offset in pixels...
set tabStart $_start
if { $itk_option(-raiseselect) } {
set raiseAmt 2
} else {
set raiseAmt 0
}
#
# Depending on the tab layout: n, s, e, or w place the tabs
# according to orientation, raise, margins, etc.
#
switch $itk_option(-tabpos) {
n {
set _selectedTop [expr {$_margin + 1}]
set _deselectedTop [expr {$_selectedTop + $raiseAmt}]
if { $itk_option(-equaltabs) } {
set tabWidth $maxWidth
} else {
set tabWidth 0
}
foreach tab $_tabs {
if { $tab == $currTabName } {
$tab configure -left $tabStart -top $_selectedTop \
-height $maxHeight -width $tabWidth -anchor c
} else {
$tab configure -left $tabStart -top $_deselectedTop \
-height $maxHeight -width $tabWidth -anchor c
}
set tabStart [expr {$tabStart + [_calcNextTabOffset $tab]}]
}
}
s {
set _selectedTop 0
set _deselectedTop [expr {$_selectedTop - $raiseAmt}]
if { $itk_option(-equaltabs) } {
set tabWidth $maxWidth
} else {
set tabWidth 0
}
foreach tab $_tabs {
if { $tab == $currTabName } {
$tab configure -left $tabStart -top $_selectedTop \
-height $maxHeight -width $tabWidth -anchor c
} else {
$tab configure -left $tabStart -top $_deselectedTop \
-height $maxHeight -width $tabWidth -anchor c
}
set tabStart [expr {$tabStart + [_calcNextTabOffset $tab]}]
}
}
w {
set _selectedLeft [expr {$_margin + 1}]
set _deselectedLeft [expr {$_selectedLeft + $raiseAmt}]
if { $itk_option(-equaltabs) } {
set tabHeight $maxHeight
} else {
set tabHeight 0
}
foreach tab $_tabs {
# selected
if { $tab == $currTabName } {
$tab configure -top $tabStart -left $_selectedLeft \
-height $tabHeight -width $maxWidth -anchor e
# deselected
} else {
$tab configure -top $tabStart -left $_deselectedLeft \
-height $tabHeight -width $maxWidth -anchor e
}
set tabStart [expr {$tabStart + [_calcNextTabOffset $tab]}]
}
}
e {
set _selectedLeft 0
set _deselectedLeft [expr {$_selectedLeft - $raiseAmt}]
if { $itk_option(-equaltabs) } {
set tabHeight $maxHeight
} else {
set tabHeight 0
}
foreach tab $_tabs {
# selected
if { $tab == $currTabName } {
$tab configure -top $tabStart -left $_selectedLeft \
-height $tabHeight -width $maxWidth -anchor w
# deselected
} else {
$tab configure -top $tabStart -left $_deselectedLeft \
-height $tabHeight -width $maxWidth -anchor w
}
set tabStart [expr {$tabStart + [_calcNextTabOffset $tab]}]
}
}
default {
error "bad anchor position\
\"$itk_option(-tabpos)\" must be n, s, e, or w"
}
}
# put border on & calc our new canvas size...
_drawBevelBorder
_recalcCanvasGeom
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _drawBevelBorder
#
# draws the bevel border along tab edge (below selected tab)
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_drawBevelBorder {} {
$itk_component(canvas) delete bevelBorder
switch $itk_option(-tabpos) {
n {
$itk_component(canvas) create line \
0 [expr {$_canvasHeight - 1}] \
$_canvasWidth [expr {$_canvasHeight - 1}] \
-fill [iwidgets::colors::topShadow $itk_option(-selectbackground)] \
-tags bevelBorder
$itk_component(canvas) create line \
0 $_canvasHeight \
$_canvasWidth $_canvasHeight \
-fill [iwidgets::colors::topShadow $itk_option(-selectbackground)] \
-tags bevelBorder
}
s {
$itk_component(canvas) create line \
0 0 \
$_canvasWidth 0 \
-fill [iwidgets::colors::bottomShadow $itk_option(-selectbackground)] \
-tags bevelBorder
$itk_component(canvas) create line \
0 1 \
$_canvasWidth 1 \
-fill black \
-tags bevelBorder
}
w {
$itk_component(canvas) create line \
$_canvasWidth 0 \
$_canvasWidth [expr {$_canvasHeight - 1}] \
-fill [iwidgets::colors::topShadow $itk_option(-selectbackground)] \
-tags bevelBorder
$itk_component(canvas) create line \
[expr {$_canvasWidth - 1}] 0 \
[expr {$_canvasWidth - 1}] [expr {$_canvasHeight - 1}] \
-fill [iwidgets::colors::topShadow $itk_option(-selectbackground)] \
-tags bevelBorder
}
e {
$itk_component(canvas) create line \
0 0 \
0 [expr {$_canvasHeight - 1}] \
-fill black \
-tags bevelBorder
$itk_component(canvas) create line \
1 0 \
1 [expr {$_canvasHeight - 1}] \
-fill [iwidgets::colors::bottomShadow $itk_option(-selectbackground)] \
-tags bevelBorder
}
}
$itk_component(canvas) raise bevelBorder
if { $_currTab != -1 } {
set currTabName [lindex $_tabs $_currTab]
$currTabName raise
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _calcNextTabOffset
#
# given $tabName, determines the offset in pixels to place
# the next tab's start edge at.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_calcNextTabOffset {tabName} {
if { $_gap == "overlap" } {
return [$tabName offset]
} else {
return [expr {[$tabName majordim] + $_gap}]
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _tabBounds
#
# calculates the bounding box that will completely enclose
# all the tabs.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_tabBounds {} {
set bbox { 100000 100000 -10000 -10000 }
foreach tab $_tabs {
set tabBBox [$tab bbox]
# if this left is less use it
if { [lindex $tabBBox 0] < [lindex $bbox 0] } {
set bbox [lreplace $bbox 0 0 [lindex $tabBBox 0]]
}
# if this top is greater use it
if { [lindex $tabBBox 1] < [lindex $bbox 1] } {
set bbox [lreplace $bbox 1 1 [lindex $tabBBox 1]]
}
# if this right is less use it
if { [lindex $tabBBox 2] > [lindex $bbox 2] } {
set bbox [lreplace $bbox 2 2 [lindex $tabBBox 2]]
}
# if this bottom is greater use it
if { [lindex $tabBBox 3] > [lindex $bbox 3] } {
set bbox [lreplace $bbox 3 3 [lindex $tabBBox 3]]
}
}
return $bbox
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _recalcCanvasGeom
#
# Based on size of tabs, recalculates the canvas geometry that
# will hold the tabs.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_recalcCanvasGeom {} {
if { [llength $_tabs] == 0 } {
return
}
set bbox [_tabBounds]
set width [lindex [_tabBounds] 2]
set height [lindex [_tabBounds] 3]
# now we have the dimensions of all the tabs in the canvas.
switch $itk_option(-tabpos) {
n {
# height already includes margin
$itk_component(canvas) configure \
-width $width \
-height $height
}
s {
$itk_component(canvas) configure \
-width $width \
-height [expr {$height + $_margin}]
}
w {
# width already includes margin
$itk_component(canvas) configure \
-width $width \
-height [expr {$height + 1}]
}
e {
$itk_component(canvas) configure \
-width [expr {$width + $_margin}] \
-height [expr {$height + 1}]
}
default {
}
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _canvasReconfigure
#
# Bound to the reconfigure notify event of a canvas, this
# method resets canvas's correct width (since we are fill x)
# and redraws the beveled edge border.
# will hold the tabs.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_canvasReconfigure {width height} {
set _canvasWidth $width
set _canvasHeight $height
if { [llength $_tabs] > 0 } {
_drawBevelBorder
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _startMove
#
# This method is bound to the MB2 down in the canvas area of the
# tab set. This starts animated scrolling of the tabs along their
# major axis.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_startMove {x y} {
if { $itk_option(-tabpos) == "n" || $itk_option(-tabpos) == "s" } {
set _anchorX $x
} else {
set _anchorY $y
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _moveTabs
#
# This method is bound to the MB2 motion in the canvas area of the
# tab set. This causes the tabset to move with the mouse.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_moveTabs {x y} {
if { $itk_option(-tabpos) == "n" || $itk_option(-tabpos) == "s" } {
set startX [expr {$_start + $x - $_anchorX}]
foreach tab $_tabs {
$tab configure -left $startX
set startX [expr {$startX + [_calcNextTabOffset $tab]}]
}
} else {
set startY [expr {$_start + $y - $_anchorY}]
foreach tab $_tabs {
$tab configure -top $startY
set startY [expr {$startY + [_calcNextTabOffset $tab]}]
}
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _endMove
#
# This method is bound to the MB2 release in the canvas area of the
# tab set. This causes the tabset to end moving tabs.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tabset::_endMove {x y} {
if { $itk_option(-tabpos) == "n" || $itk_option(-tabpos) == "s" } {
set startX [expr {$_start + $x - $_anchorX}]
set _skipRelayout true
configure -start $startX
set _skipRelayout false
} else {
set startY [expr {$_start + $y - $_anchorY}]
set _skipRelayout true
configure -start $startY
set _skipRelayout false
}
}
#==============================================================
# CLASS: Tab
#==============================================================
itcl::class iwidgets::Tab {
constructor {args} {}
destructor {}
public variable bevelamount 0 {}
public variable state normal {}
public variable height 0 {}
public variable width 0 {}
public variable anchor c {}
public variable left 0 {}
public variable top 0 {}
public variable image {} {}
public variable bitmap {} {}
public variable label {} {}
public variable padx 4 {}
public variable pady 4 {}
public variable selectbackground "gray70" {}
public variable selectforeground "black" {}
public variable disabledforeground "gray" {}
public variable background "white" {}
public variable foreground "black" {}
public variable orient vertical {}
public variable invert false {}
public variable angle 20 {}
public variable font \
"-adobe-helvetica-bold-r-normal--34-240-100-100-p-182-iso8859-1" {}
public variable tabborders true {}
public method configure {args}
public method bbox {}
public method deselect {}
public method lower {}
public method majordim {}
public method minordim {}
public method offset {}
public method raise {}
public method select {}
public method labelheight {}
public method labelwidth {}
private method _makeTab {}
private method _createLabel {canvas tagList}
private method _makeEastTab {canvas}
private method _makeWestTab {canvas}
private method _makeNorthTab {canvas}
private method _makeSouthTab {canvas}
private method _calcLabelDim {labelItem}
private method _itk_config {args} @itcl-builtin-configure
private method _selectNoRaise {}
private method _deselectNoLower {}
private variable _selected false
private variable _padX 0
private variable _padY 0
private variable _canvas
# these are in pixels
private variable _left 0
private variable _width 0
private variable _height 0
private variable _oldLeft 0
private variable _top 0
private variable _oldTop 0
private variable _right
private variable _bottom
private variable _offset
private variable _majorDim
private variable _minorDim
private variable _darkShadow
private variable _lightShadow
#
# graphic components that make up a tab
#
private variable _gRegion
private variable _gLabel
private variable _gLightOutline {}
private variable _gBlackOutline {}
private variable _gTopLine
private variable _gTopLineShadow
private variable _gLightShadow
private variable _gDarkShadow
private variable _labelWidth 0
private variable _labelHeight 0
private variable _labelXOrigin 0
private variable _labelYOrigin 0
private variable _just left
private variable _configTripped true
common _tan
set _tan(0) 0.0
set _tan(1) 0.0175
set _tan(2) 0.0349
set _tan(3) 0.0524
set _tan(4) 0.0699
set _tan(5) 0.0875
set _tan(6) 0.1051
set _tan(7) 0.1228
set _tan(8) 0.1405
set _tan(9) 0.1584
set _tan(10) 0.1763
set _tan(11) 0.1944
set _tan(12) 0.2126
set _tan(13) 0.2309
set _tan(14) 0.2493
set _tan(15) 0.2679
set _tan(16) 0.2867
set _tan(17) 0.3057
set _tan(18) 0.3249
set _tan(19) 0.3443
set _tan(20) 0.3640
set _tan(21) 0.3839
set _tan(22) 0.4040
set _tan(23) 0.4245
set _tan(24) 0.4452
set _tan(25) 0.4663
set _tan(26) 0.4877
set _tan(27) 0.5095
set _tan(28) 0.5317
set _tan(29) 0.5543
set _tan(30) 0.5774
set _tan(31) 0.6009
set _tan(32) 0.6294
set _tan(33) 0.6494
set _tan(34) 0.6745
set _tan(35) 0.7002
set _tan(36) 0.7265
set _tan(37) 0.7536
set _tan(38) 0.7813
set _tan(39) 0.8098
set _tan(40) 0.8391
set _tan(41) 0.8693
set _tan(42) 0.9004
set _tan(43) 0.9325
set _tan(44) 0.9657
set _tan(45) 1.0
}
# ----------------------------------------------------------------------
# CONSTRUCTOR
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::constructor {args} {
set _canvas [lindex $args 0]
set args [lrange $args 1 [llength $args]]
set _darkShadow [iwidgets::colors::bottomShadow $selectbackground]
set _lightShadow [iwidgets::colors::topShadow $selectbackground]
if { $args != "" } {
eval configure $args
}
}
# ----------------------------------------------------------------------
# DESTRUCTOR
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::destructor {} {
if { [winfo exists $_canvas] } {
$_canvas delete $this
}
}
# ----------------------------------------------------------------------
# OPTIONS
# ----------------------------------------------------------------------
#
# Note, we trip _configTripped for every option that requires the tab
# to be remade.
#
# ----------------------------------------------------------------------
# OPTION -bevelamount
#
# Specifies the size of tab corners. A value of 0 with angle set
# to 0 results in square tabs. A bevelAmount of 4, means that the
# tab will be drawn with angled corners that cut in 4 pixels from
# the edge of the tab. The default is 0.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::bevelamount {
}
# ----------------------------------------------------------------------
# OPTION -state
#
# sets the active state of the tab. specifying normal allows
# the tab to be selectable. Specifying disabled disables the tab,
# causing its image, bitmap, or label to be drawn with the
# disabledForeground color.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::state {
}
# ----------------------------------------------------------------------
# OPTION -height
#
# the height of the tab. if 0, uses the font label height.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::height {
set _height [winfo pixels $_canvas $height]
set _configTripped true
}
# ----------------------------------------------------------------------
# OPTION -width
#
# The width of the tab. If 0, uses the font label width.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::width {
set _width [winfo pixels $_canvas $width]
set _configTripped true
}
# ----------------------------------------------------------------------
# OPTION -anchor
#
# Where the text in the tab will be anchored: n,nw,ne,s,sw,se,e,w,center
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::anchor {
}
# ----------------------------------------------------------------------
# OPTION -left
#
# Specifies the left edge of the tab's bounding box. This value
# may have any of the forms acceptable to Tk_GetPixels.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::left {
# get into pixels
set _left [winfo pixels $_canvas $left]
# move by offset from last setting
$_canvas move $this [expr {$_left - $_oldLeft}] 0
# update old for next time
set _oldLeft $_left
}
# ----------------------------------------------------------------------
# OPTION -top
#
# Specifies the topedge of the tab's bounding box. This value may
# have any of the forms acceptable to Tk_GetPixels.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::top {
# get into pixels
set _top [winfo pixels $_canvas $top]
# move by offset from last setting
$_canvas move $this 0 [expr {$_top - $_oldTop}]
# update old for next time
set _oldTop $_top
}
# ----------------------------------------------------------------------
# OPTION -image
#
# Specifies the imageto display in the tab.
# Images are created with the image create command.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::image {
set _configTripped true
}
# ----------------------------------------------------------------------
# OPTION -bitmap
#
# If bitmap is an empty string, specifies the bitmap to display in
# the tab. Bitmap may be of any of the forms accepted by Tk_GetBitmap.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::bitmap {
set _configTripped true
}
# ----------------------------------------------------------------------
# OPTION -label
#
# If image is an empty string and bitmap is an empty string,
# it specifies a text string to be placed in the tab's label.
# This label serves as an additional identifier used to reference
# the tab. Label may be used for the index value in widget commands.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::label {
set _configTripped true
}
# ----------------------------------------------------------------------
# OPTION -padx
#
# Horizontal padding around the label (text, image, or bitmap).
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::padx {
set _configTripped true
set _padX [winfo pixels $_canvas $padx]
}
# ----------------------------------------------------------------------
# OPTION -pady
#
# Vertical padding around the label (text, image, or bitmap).
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::pady {
set _configTripped true
set _padY [winfo pixels $_canvas $pady]
}
# ----------------------------------------------------------------------
# OPTION -selectbackground
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::selectbackground {
set _darkShadow [iwidgets::colors::bottomShadow $selectbackground]
set _lightShadow [iwidgets::colors::topShadow $selectbackground]
if { $_selected } {
_selectNoRaise
} else {
_deselectNoLower
}
}
# ----------------------------------------------------------------------
# OPTION -selectforeground
#
# Foreground of tab when selected
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::selectforeground {
if { $_selected } {
_selectNoRaise
} else {
_deselectNoLower
}
}
# ----------------------------------------------------------------------
# OPTION -disabledforeground
#
# Background of tab when -state is disabled
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::disabledforeground {
if { $_selected } {
_selectNoRaise
} else {
_deselectNoLower
}
}
# ----------------------------------------------------------------------
# OPTION -background
#
# Normal background of tab.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::background {
if { $_selected } {
_selectNoRaise
} else {
_deselectNoLower
}
}
# ----------------------------------------------------------------------
# OPTION -foreground
#
# Foreground of tabs when in normal unselected state
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::foreground {
if { $_selected } {
_selectNoRaise
} else {
_deselectNoLower
}
}
# ----------------------------------------------------------------------
# OPTION -orient
#
# Specifies the orientation of the tab. Orient can be either
# horizontal or vertical.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::orient {
set _configTripped true
}
# ----------------------------------------------------------------------
# OPTION -invert
#
# Specifies the direction to draw the tab. If invert is true,
# it draws horizontal tabs upside down and vertical tabs opening
# to the left (pointing right). The value may have any of the
# forms accepted by the Tcl_GetBoolean, such as true,
# false, 0, 1, yes, or no.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::invert {
set _configTripped true
}
# ----------------------------------------------------------------------
# OPTION -angle
#
# Specifes the angle of slope from the inner edge to the outer edge
# of the tab. An angle of 0 specifies square tabs. Valid ranges are
# 0 to 45 degrees inclusive. Default is 15 degrees. If this option
# is specified as an empty string (the default), then the angle
# option for the overall Tabset is used.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::angle {
if {$angle < 0 || $angle > 45 } {
error "bad angle: must be between 0 and 45"
}
set _configTripped true
}
# ----------------------------------------------------------------------
# OPTION -font
#
# Font for tab text.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::font {
}
# ----------------------------------------------------------------------
# OPTION -tabborders
#
# Specifies whether to draw the borders of a deselected tab.
# Specifying true (the default) draws these borders,
# specifying false disables this drawing. If the tab is in
# its selected state this option has no effect.
# The value may have any of the forms accepted by the
# Tcl_GetBoolean, such as true, false, 0, 1, yes, or no.
# ----------------------------------------------------------------------
itcl::configbody iwidgets::Tab::tabborders {
set _configTripped true
}
# ----------------------------------------------------------------------
# METHOD: configure ?option value?
#
# Configures the Tab, checks a configTripped flag to see if the tab
# needs to be remade. We take the easy way since it is so inexpensive
# to delete canvas items and remake them.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::configure {args} {
set len [llength $args]
switch $len {
0 {
set result [_itk_config]
return $result
}
1 {
set result [eval _itk_config $args]
return $result
}
default {
eval _itk_config $args
if { $_configTripped } {
_makeTab
set _configTripped false
}
return ""
}
}
}
# ----------------------------------------------------------------------
# METHOD: bbox
#
# Returns the bounding box of the tab
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::bbox {} {
return [lappend bbox $_left $_top $_right $_bottom]
}
# ----------------------------------------------------------------------
# METHOD: deselect
#
# Causes the given tab to be drawn as deselected and lowered
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::deselect {} {
global tcl_platform
$_canvas lower $this
if {$tcl_platform(os) == "HP-UX"} {
update idletasks
}
_deselectNoLower
}
# ----------------------------------------------------------------------
# METHOD: lower
#
# Lowers the tab below all others in the canvas.
#
# This is used as our tag name on the canvas.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::lower {} {
$_canvas lower $this
}
# ----------------------------------------------------------------------
# METHOD: majordim
#
# Returns the width for horizontal tabs and the height for
# vertical tabs.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::majordim {} {
return $_majorDim
}
# ----------------------------------------------------------------------
# METHOD: minordim
#
# Returns the height for horizontal tabs and the width for
# vertical tabs.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::minordim {} {
return $_minorDim
}
# ----------------------------------------------------------------------
# METHOD: offset
#
# Returns the width less the angle offset. This allows a
# geometry manager to ask where to place a sibling tab.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::offset {} {
return $_offset
}
# ----------------------------------------------------------------------
# METHOD: raise
#
# Raises the tab above all others in the canvas.
#
# This is used as our tag name on the canvas.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::raise {} {
$_canvas raise $this
}
# ----------------------------------------------------------------------
# METHOD: select
#
# Causes the given tab to be drawn as selected. 3d shadows are
# turned on and top line and top line shadow are drawn in sel
# bg color to hide them.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::select {} {
global tcl_platform
$_canvas raise $this
if {$tcl_platform(os) == "HP-UX"} {
update idletasks
}
_selectNoRaise
}
# ----------------------------------------------------------------------
# METHOD: labelheight
#
# Returns the height of the tab's label in its current font.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::labelheight {} {
if {$_gLabel != 0} {
set labelBBox [$_canvas bbox $_gLabel]
set labelHeight [expr {[lindex $labelBBox 3] - [lindex $labelBBox 1]}]
} else {
set labelHeight 0
}
return $labelHeight
}
# ----------------------------------------------------------------------
# METHOD: labelwidth
#
# Returns the width of the tab's label in its current font.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::labelwidth {} {
if {$_gLabel != 0} {
set labelBBox [$_canvas bbox $_gLabel]
set labelWidth [expr {[lindex $labelBBox 2] - [lindex $labelBBox 0]}]
} else {
set labelWidth 0
}
return $labelWidth
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _selectNoRaise
#
# Draws tab as selected without raising it.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::_selectNoRaise {} {
if { ! [info exists _gRegion] } {
return
}
$_canvas itemconfigure $_gRegion -fill $selectbackground
$_canvas itemconfigure $_gTopLine -fill $selectbackground
$_canvas itemconfigure $_gTopLineShadow -fill $selectbackground
$_canvas itemconfigure $_gLightShadow -fill $_lightShadow
$_canvas itemconfigure $_gDarkShadow -fill $_darkShadow
if { $_gLightOutline != {} } {
$_canvas itemconfigure $_gLightOutline -fill $_lightShadow
}
if { $_gBlackOutline != {} } {
$_canvas itemconfigure $_gBlackOutline -fill black
}
if { $state == "normal" } {
if { $image != {}} {
# do nothing for now
} elseif { $bitmap != {}} {
$_canvas itemconfigure $_gLabel \
-foreground $selectforeground \
-background $selectbackground
} else {
$_canvas itemconfigure $_gLabel -fill $selectforeground
}
} else {
if { $image != {}} {
# do nothing for now
} elseif { $bitmap != {}} {
$_canvas itemconfigure $_gLabel \
-foreground $disabledforeground \
-background $selectbackground
} else {
$_canvas itemconfigure $_gLabel -fill $disabledforeground
}
}
set _selected true
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _deselectNoLower
#
# Causes the given tab to be drawn as deselected. 3d shadows are
# removed and top line and top line shadow are drawn in visible
# colors to reveal them.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::_deselectNoLower {} {
if { ! [info exists _gRegion] } {
return
}
$_canvas itemconfigure $_gRegion -fill $background
$_canvas itemconfigure $_gTopLine -fill black
$_canvas itemconfigure $_gTopLineShadow -fill $_darkShadow
$_canvas itemconfigure $_gLightShadow -fill $background
$_canvas itemconfigure $_gDarkShadow -fill $background
if { $tabborders } {
if { $_gLightOutline != {} } {
$_canvas itemconfigure $_gLightOutline -fill $_lightShadow
}
if { $_gBlackOutline != {} } {
$_canvas itemconfigure $_gBlackOutline -fill black
}
} else {
if { $_gLightOutline != {} } {
$_canvas itemconfigure $_gLightOutline -fill $background
}
if { $_gBlackOutline != {} } {
$_canvas itemconfigure $_gBlackOutline -fill $background
}
}
if { $state == "normal" } {
if { $image != {}} {
# do nothing for now
} elseif { $bitmap != {}} {
$_canvas itemconfigure $_gLabel \
-foreground $foreground \
-background $background
} else {
$_canvas itemconfigure $_gLabel -fill $foreground
}
} else {
if { $image != {}} {
# do nothing for now
} elseif { $bitmap != {}} {
$_canvas itemconfigure $_gLabel \
-foreground $disabledforeground \
-background $background
} else {
$_canvas itemconfigure $_gLabel -fill $disabledforeground
}
}
set _selected false
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _makeTab
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::_makeTab {} {
if { $orient == "horizontal" } {
if { $invert } {
_makeNorthTab $_canvas
} else {
_makeSouthTab $_canvas
}
} elseif { $orient == "vertical" } {
if { $invert } {
_makeEastTab $_canvas
} else {
_makeWestTab $_canvas
}
} else {
error "bad value for option -orient"
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _createLabel
#
# Creates the label for the tab. Can be either a text label
# or a bitmap label.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::_createLabel {canvas tagList} {
if { $image != {}} {
set _gLabel [$canvas create image \
0 0 \
-image $image \
-anchor nw \
-tags $tagList \
]
} elseif { $bitmap != {}} {
set _gLabel [$canvas create bitmap \
0 0 \
-bitmap $bitmap \
-anchor nw \
-tags $tagList \
]
} else {
set _gLabel [$canvas create text \
0 0 \
-text $label \
-font $font \
-anchor nw \
-tags $tagList \
]
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _makeEastTab
#
# Makes a tab that hangs to the east and opens to the west.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::_makeEastTab {canvas} {
$canvas delete $this
set _gLightOutline {}
set _gBlackOutline {}
lappend tagList $this TAB
_createLabel $canvas $tagList
_calcLabelDim $_gLabel
set right [expr {$_left + $_labelWidth}]
# now have _left, _top, right...
# Turn off calculating angle tabs on Vertical orientations
set angleOffset 0
set outerTop $_top
set outerBottom \
[expr {$outerTop + $angleOffset + $_labelHeight + $angleOffset}]
set innerTop [expr {$outerTop + $angleOffset}]
set innerBottom [expr {$outerTop + $angleOffset + $_labelHeight}]
# now have _left, _top, right, outerTop, innerTop,
# innerBottom, outerBottom, width, height
set bottom $innerBottom
# tab area... gets filled either white or selected
# done
set _gRegion [$canvas create polygon \
$_left $outerTop \
[expr {$right - $bevelamount}] $innerTop \
$right [expr {$innerTop + $bevelamount}] \
$right [expr {$innerBottom - $bevelamount}] \
[expr {$right - $bevelamount}] $innerBottom \
$_left $outerBottom \
$_left $outerTop \
-tags $tagList \
]
# lighter shadow (left edge)
set _gLightShadow [$canvas create line \
[expr {$_left - 3}] [expr {$outerTop + 1}] \
[expr {$right - $bevelamount}] [expr {$innerTop + 1}] \
-tags $tagList \
]
# darker shadow (bottom and right edges)
set _gDarkShadow [$canvas create line \
[expr {$right - $bevelamount}] [expr {$innerTop + 1}] \
[expr {$right - 1}] [expr {$innerTop + $bevelamount}] \
[expr {$right - 1}] [expr {$innerBottom - $bevelamount}] \
[expr {$right - $bevelamount}] [expr {$innerBottom - 1}] \
[expr {$_left - 3}] [expr {$outerBottom - 1}] \
-tags $tagList \
]
# outline of tab
set _gLightOutline [$canvas create line \
$_left $outerTop \
[expr {$right - $bevelamount}] $innerTop \
-tags $tagList \
]
# outline of tab
set _gBlackOutline [$canvas create line \
[expr {$right - $bevelamount}] $innerTop \
$right [expr {$innerTop + $bevelamount}] \
$right [expr {$innerBottom - $bevelamount}] \
[expr {$right - $bevelamount}] $innerBottom \
$_left $outerBottom \
$_left $outerTop \
-tags $tagList \
]
# line closest to the edge
set _gTopLineShadow [$canvas create line \
$_left $outerTop \
$_left $outerBottom \
-tags $tagList \
]
# next line down
set _gTopLine [$canvas create line \
[expr {$_left + 1}] [expr {$outerTop + 2}] \
[expr {$_left + 1}] [expr {$outerBottom - 1}] \
-tags $tagList \
]
$canvas coords $_gLabel [expr {$_left + $_labelXOrigin}] \
[expr {$innerTop + $_labelYOrigin}]
if { $image != {} || $bitmap != {} } {
$canvas itemconfigure $_gLabel -anchor $anchor
} else {
$canvas itemconfigure $_gLabel -anchor $anchor -justify $_just
}
$canvas raise $_gLabel $_gRegion
set _offset [expr {$innerBottom - $outerTop}]
# height
set _majorDim [expr {$outerBottom - $outerTop}]
# width
set _minorDim [expr {$right - $_left}]
set _right $right
set _bottom $outerBottom
# draw in correct state...
if { $_selected } {
select
} else {
deselect
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _makeWestTab
#
# Makes a tab that hangs to the west and opens to the east.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::_makeWestTab {canvas} {
$canvas delete $this
set _gLightOutline {}
set _gBlackOutline {}
lappend tagList $this TAB
_createLabel $canvas $tagList
_calcLabelDim $_gLabel
set right [expr {$_left + $_labelWidth}]
# now have _left, _top, right...
# Turn off calculating angle tabs on Vertical orientations
set angleOffset 0
set outerTop $_top
set outerBottom \
[expr {$outerTop + $angleOffset + $_labelHeight + $angleOffset}]
set innerTop [expr {$outerTop + $angleOffset}]
set innerBottom [expr {$outerTop + $angleOffset + $_labelHeight}]
# now have _left, _top, right, outerTop, innerTop,
# innerBottom, outerBottom, width, height
# tab area... gets filled either white or selected
# done
set _gRegion [$canvas create polygon \
$right $outerTop \
[expr {$_left + $bevelamount}] $innerTop \
$_left [expr {$innerTop + $bevelamount}] \
$_left [expr {$innerBottom - $bevelamount}]\
[expr {$_left + $bevelamount}] $innerBottom \
$right $outerBottom \
$right $outerTop \
-tags $tagList \
]
# lighter shadow (left edge)
set _gLightShadow [$canvas create line \
$right [expr {$outerTop+1}] \
[expr {$_left + $bevelamount}] [expr {$innerTop + 1}] \
[expr {$_left + 1}] [expr {$innerTop + $bevelamount}] \
[expr {$_left + 1}] [expr {$innerBottom - $bevelamount}] \
-tags $tagList \
]
# darker shadow (bottom and right edges)
set _gDarkShadow [$canvas create line \
[expr {$_left + 1}] [expr {$innerBottom - $bevelamount}] \
[expr {$_left + $bevelamount}] [expr {$innerBottom - 1}] \
$right [expr {$outerBottom - 1}] \
-tags $tagList \
]
# outline of tab -- lighter top left sides
set _gLightOutline [$canvas create line \
$right $outerTop \
[expr {$_left + $bevelamount}] $innerTop \
$_left [expr {$innerTop + $bevelamount}] \
$_left [expr {$innerBottom - $bevelamount}]\
-tags $tagList \
]
# outline of tab -- darker bottom side
set _gBlackOutline [$canvas create line \
$_left [expr {$innerBottom - $bevelamount}]\
[expr {$_left + $bevelamount}] $innerBottom \
$right $outerBottom \
$right $outerTop \
-tags $tagList \
]
# top of tab
set _gTopLine [$canvas create line \
[expr {$right + 1}] $outerTop \
[expr {$right + 1}] $outerBottom \
-tags $tagList \
]
# line below top of tab
set _gTopLineShadow [$canvas create line \
$right $outerTop \
$right $outerBottom \
-tags $tagList \
]
$canvas coords $_gLabel [expr {$_left + $_labelXOrigin}] \
[expr {$innerTop + $_labelYOrigin}]
if { $image != {} || $bitmap != {} } {
$canvas itemconfigure $_gLabel -anchor $anchor
} else {
$canvas itemconfigure $_gLabel -anchor $anchor -justify $_just
}
$canvas raise $_gLabel $_gRegion
set _offset [expr {$innerBottom - $outerTop}]
# height
set _majorDim [expr {$outerBottom - $outerTop}]
# width
set _minorDim [expr {$right - $_left}]
set _right $right
set _bottom $outerBottom
# draw in correct state...
if { $_selected } {
select
} else {
deselect
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _makeNorthTab
#
# Makes a tab that hangs to the north and opens to the south.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::_makeNorthTab {canvas} {
$canvas delete $this
set _gLightOutline {}
set _gBlackOutline {}
lappend tagList $this TAB
_createLabel $canvas $tagList
# first get the label width and height
_calcLabelDim $_gLabel
set bottom [expr {$_top + $_labelHeight}]
set angleOffset [expr {$_labelHeight * $_tan($angle)}]
set outerLeft $_left
set outerRight \
[expr {$outerLeft + $angleOffset + $_labelWidth + $angleOffset}]
set innerLeft [expr {$outerLeft + $angleOffset}]
set innerRight [expr {$outerLeft + $angleOffset + $_labelWidth}]
# tab area... gets filled either white or selected
set _gRegion [$canvas create polygon \
$outerLeft [expr {$bottom + 3}] \
$innerLeft [expr {$_top + $bevelamount}] \
[expr {$innerLeft + $bevelamount}] $_top \
[expr {$innerRight - $bevelamount}] $_top \
$innerRight [expr {$_top + $bevelamount}]\
$outerRight [expr {$bottom + 3}] \
$outerLeft [expr {$bottom + 3}] \
-tags $tagList \
]
# lighter shadow (left edge)
set _gLightShadow [$canvas create line \
[expr {$outerLeft + 1}] [expr {$bottom + 3}] \
[expr {$innerLeft + 1}] [expr {$_top + $bevelamount}] \
[expr {$innerLeft + $bevelamount}] [expr {$_top + 1}]\
[expr {$innerRight - $bevelamount}] [expr {$_top + 1}]\
-tags $tagList \
]
# darker shadow (bottom and right edges)
set _gDarkShadow [$canvas create line \
[expr {$innerRight - $bevelamount}] [expr {$_top + 1}]\
[expr {$innerRight - 1}] [expr {$_top + $bevelamount}]\
[expr {$outerRight - 1}] [expr {$bottom + 3}]\
-tags $tagList \
]
set _gLightOutline [$canvas create line \
$outerLeft [expr {$bottom + 3}] \
$innerLeft [expr {$_top + $bevelamount}] \
[expr {$innerLeft + $bevelamount}] $_top \
[expr {$innerRight - $bevelamount}] $_top \
-tags $tagList \
]
set _gBlackOutline [$canvas create line \
[expr {$innerRight - $bevelamount}] $_top \
$innerRight [expr {$_top + $bevelamount}]\
$outerRight [expr {$bottom + 3}] \
$outerLeft [expr {$bottom + 3}] \
-tags $tagList \
]
# top of tab... to make it closed off
set _gTopLine [$canvas create line \
0 0 0 0\
-tags $tagList \
]
# top of tab... to make it closed off
set _gTopLineShadow [$canvas create line \
0 0 0 0 \
-tags $tagList \
]
$canvas coords $_gLabel [expr {$innerLeft + $_labelXOrigin}] \
[expr {$_top + $_labelYOrigin}]
if { $image != {} || $bitmap != {} } {
$canvas itemconfigure $_gLabel -anchor $anchor
} else {
$canvas itemconfigure $_gLabel -anchor $anchor -justify $_just
}
$canvas raise $_gLabel $_gRegion
set _offset [expr {$innerRight - $outerLeft}]
# width
set _majorDim [expr {$outerRight - $outerLeft}]
# height
set _minorDim [expr {$bottom - $_top}]
set _right $outerRight
set _bottom $bottom
# draw in correct state...
if { $_selected } {
select
} else {
deselect
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _makeSouthTab
#
# Makes a tab that hangs to the south and opens to the north.
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::_makeSouthTab {canvas} {
$canvas delete $this
set _gLightOutline {}
set _gBlackOutline {}
lappend tagList $this TAB
_createLabel $canvas $tagList
# first get the label width and height
_calcLabelDim $_gLabel
set bottom [expr {$_top + $_labelHeight}]
set angleOffset [expr {$_labelHeight * $_tan($angle)}]
set outerLeft $_left
set outerRight \
[expr {$outerLeft + $angleOffset + $_labelWidth + $angleOffset}]
set innerLeft [expr {$outerLeft + $angleOffset}]
set innerRight [expr {$outerLeft + $angleOffset + $_labelWidth}]
# tab area... gets filled either white or selected
set _gRegion [$canvas create polygon \
$outerLeft [expr {$_top + 1}] \
$innerLeft [expr {$bottom - $bevelamount}]\
[expr {$innerLeft + $bevelamount}] $bottom \
[expr {$innerRight - $bevelamount}] $bottom \
$innerRight [expr {$bottom - $bevelamount}]\
$outerRight [expr {$_top + 1}] \
$outerLeft [expr {$_top + 1}] \
-tags $tagList \
]
# lighter shadow (left edge)
set _gLightShadow [$canvas create line \
[expr {$outerLeft+1}] $_top \
[expr {$innerLeft+1}] [expr {$bottom-$bevelamount}] \
-tags $tagList \
]
# darker shadow (bottom and right edges)
set _gDarkShadow [$canvas create line \
[expr {$innerLeft+1}] [expr {$bottom-$bevelamount}] \
[expr {$innerLeft+$bevelamount}] [expr {$bottom-1}] \
[expr {$innerRight-$bevelamount}] [expr {$bottom-1}] \
[expr {$innerRight-1}] [expr {$bottom-$bevelamount}] \
[expr {$outerRight-1}] [expr {$_top + 1}] \
-tags $tagList \
]
# outline of tab
set _gBlackOutline [$canvas create line \
$outerLeft [expr {$_top + 1}] \
$innerLeft [expr {$bottom -$bevelamount}]\
[expr {$innerLeft + $bevelamount}] $bottom \
[expr {$innerRight - $bevelamount}] $bottom \
$innerRight [expr {$bottom - $bevelamount}]\
$outerRight [expr {$_top + 1}] \
-tags $tagList \
]
# top of tab... to make it closed off
set _gTopLine [$canvas create line \
$outerLeft [expr {$_top + 1}] \
$outerRight [expr {$_top + 1}] \
-tags $tagList \
]
# top of tab... to make it closed off
set _gTopLineShadow [$canvas create line \
$outerLeft $_top \
$outerRight $_top \
-tags $tagList \
]
$canvas coords $_gLabel [expr {$innerLeft + $_labelXOrigin}] \
[expr {$_top + $_labelYOrigin}]
if { $image != {} || $bitmap != {} } {
$canvas itemconfigure $_gLabel -anchor $anchor
} else {
$canvas itemconfigure $_gLabel -anchor $anchor -justify $_just
}
$canvas raise $_gLabel $_gRegion
set _offset [expr {$innerRight - $outerLeft}]
# width
set _majorDim [expr {$outerRight - $outerLeft}]
# height
set _minorDim [expr {$bottom - $_top}]
set _right $outerRight
set _bottom $bottom
# draw in correct state...
if { $_selected } {
select
} else {
deselect
}
}
# ----------------------------------------------------------------------
# PRIVATE METHOD: _calcLabelDim
#
# Calculate the width and height of the label bbox of labelItem
# can be either text or bitmap (in future also an image)
#
# There are two ways to calculate the label bbox.
#
# First, if the $_width and/or $_height is specified, we will use
# it to determine that dimension(s) width and/or height. For
# a width/height of 0 we use the labels bbox to
# give us a base width/height.
# Then we add in the padx/pady to determine final bounds.
#
# Uses the following option or option derived variables:
# -padx ($_padX - converted to pixels)
# -pady ($_padY - converted to pixels)
# -anchor ($anchor)
# -width ($_width) This is the width for inside tab (label area)
# -height ($_height) This is the width for inside tab (label area)
#
# Side Effects:
# _labelWidth will be set
# _labelHeight will be set
# _labelXOrigin will be set
# _labelYOrigin will be set
# ----------------------------------------------------------------------
itcl::body iwidgets::Tab::_calcLabelDim {labelItem} {
# ... calculate the label width and height
set labelBBox [$_canvas bbox $labelItem]
if { $_width > 0 } {
set _labelWidth [expr {$_width + ($_padX * 2)}]
} else {
set _labelWidth [expr {
([lindex $labelBBox 2] - [lindex $labelBBox 0]) + ($_padX * 2)}]
}
if { $_height > 0 } {
set _labelHeight [expr {$_height + ($_padY * 2)}]
} else {
set _labelHeight [expr {
([lindex $labelBBox 3] - [lindex $labelBBox 1]) + ($_padY * 2)}]
}
# ... calculate the label anchor point
set centerX [expr {$_labelWidth/2.0}]
set centerY [expr {$_labelHeight/2.0 - 1}]
switch $anchor {
n {
set _labelXOrigin $centerX
set _labelYOrigin $_padY
set _just center
}
s {
set _labelXOrigin $centerX
set _labelYOrigin [expr {$_labelHeight - $_padY}]
set _just center
}
e {
set _labelXOrigin [expr {$_labelWidth - $_padX - 1}]
set _labelYOrigin $centerY
set _just right
}
w {
set _labelXOrigin [expr {$_padX + 2}]
set _labelYOrigin $centerY
set _just left
}
c {
set _labelXOrigin $centerX
set _labelYOrigin $centerY
set _just center
}
ne {
set _labelXOrigin [expr {$_labelWidth - $_padX - 1}]
set _labelYOrigin $_padY
set _just right
}
nw {
set _labelXOrigin [expr {$_padX + 2}]
set _labelYOrigin $_padY
set _just left
}
se {
set _labelXOrigin [expr {$_labelWidth - $_padX - 1}]
set _labelYOrigin [expr {$_labelHeight - $_padY}]
set _just right
}
sw {
set _labelXOrigin [expr {$_padX + 2}]
set _labelYOrigin [expr {$_labelHeight - $_padY}]
set _just left
}
default {
error "bad anchor position: \
\"$tabpos\" must be n, ne, nw, s, sw, se, e, w, or center"
}
}
}