arduino-0022
This commit is contained in:
parent
4f99742f03
commit
a9ad0e80a0
803 changed files with 69785 additions and 33024 deletions
|
@ -0,0 +1,239 @@
|
|||
# Makefile for ATmegaBOOT
|
||||
# E.Lins, 18.7.2005
|
||||
# $Id$
|
||||
#
|
||||
# Instructions
|
||||
#
|
||||
# To make bootloader .hex file:
|
||||
# make diecimila
|
||||
# make lilypad
|
||||
# make ng
|
||||
# etc...
|
||||
#
|
||||
# To burn bootloader .hex file:
|
||||
# make diecimila_isp
|
||||
# make lilypad_isp
|
||||
# make ng_isp
|
||||
# etc...
|
||||
|
||||
# program name should not be changed...
|
||||
PROGRAM = optiboot
|
||||
|
||||
# enter the parameters for the avrdude isp tool
|
||||
ISPTOOL = stk500v2
|
||||
ISPPORT = usb
|
||||
ISPSPEED = -b 115200
|
||||
|
||||
MCU_TARGET = atmega168
|
||||
LDSECTION = --section-start=.text=0x3e00
|
||||
|
||||
# the efuse should really be 0xf8; since, however, only the lower
|
||||
# three bits of that byte are used on the atmega168, avrdude gets
|
||||
# confused if you specify 1's for the higher bits, see:
|
||||
# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
|
||||
#
|
||||
# similarly, the lock bits should be 0xff instead of 0x3f (to
|
||||
# unlock the bootloader section) and 0xcf instead of 0x0f (to
|
||||
# lock it), but since the high two bits of the lock byte are
|
||||
# unused, avrdude would get confused.
|
||||
|
||||
ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
|
||||
-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
|
||||
ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
|
||||
-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
|
||||
|
||||
STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
|
||||
STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
|
||||
-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt
|
||||
STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt
|
||||
|
||||
OBJ = $(PROGRAM).o
|
||||
OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls
|
||||
|
||||
DEFS =
|
||||
LIBS =
|
||||
|
||||
CC = avr-gcc
|
||||
|
||||
# Override is only needed by avr-lib build system.
|
||||
|
||||
override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
|
||||
override LDFLAGS = -Wl,$(LDSECTION) -Wl,--relax -nostartfiles
|
||||
|
||||
OBJCOPY = avr-objcopy
|
||||
OBJDUMP = avr-objdump
|
||||
|
||||
# 20MHz clocked platforms
|
||||
#
|
||||
# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue)
|
||||
#
|
||||
|
||||
pro20: TARGET = pro_20mhz
|
||||
pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
|
||||
pro20: AVR_FREQ = 20000000L
|
||||
pro20: $(PROGRAM)_pro_20mhz.hex
|
||||
pro20: $(PROGRAM)_pro_20mhz.lst
|
||||
|
||||
pro20_isp: pro20
|
||||
pro20_isp: TARGET = pro_20mhz
|
||||
pro20_isp: HFUSE = DD # 2.7V brownout
|
||||
pro20_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
|
||||
pro20_isp: EFUSE = 02 # 512 byte boot
|
||||
pro20_isp: isp
|
||||
|
||||
# 16MHz clocked platforms
|
||||
#
|
||||
# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue)
|
||||
#
|
||||
|
||||
pro16: TARGET = pro_16MHz
|
||||
pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
|
||||
pro16: AVR_FREQ = 16000000L
|
||||
pro16: $(PROGRAM)_pro_16MHz.hex
|
||||
pro16: $(PROGRAM)_pro_16MHz.lst
|
||||
|
||||
pro16_isp: pro16
|
||||
pro16_isp: TARGET = pro_16MHz
|
||||
pro16_isp: HFUSE = DD # 2.7V brownout
|
||||
pro16_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
|
||||
pro16_isp: EFUSE = 02 # 512 byte boot
|
||||
pro16_isp: isp
|
||||
|
||||
# Diecimila and NG use identical bootloaders
|
||||
#
|
||||
diecimila: TARGET = diecimila
|
||||
diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
|
||||
diecimila: AVR_FREQ = 16000000L
|
||||
diecimila: $(PROGRAM)_diecimila.hex
|
||||
diecimila: $(PROGRAM)_diecimila.lst
|
||||
|
||||
diecimila_isp: diecimila
|
||||
diecimila_isp: TARGET = diecimila
|
||||
diecimila_isp: HFUSE = DD # 2.7V brownout
|
||||
diecimila_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms
|
||||
diecimila_isp: EFUSE = 02 # 512 byte boot
|
||||
diecimila_isp: isp
|
||||
|
||||
atmega328: TARGET = atmega328
|
||||
atmega328: MCU_TARGET = atmega328p
|
||||
atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
|
||||
atmega328: AVR_FREQ = 16000000L
|
||||
atmega328: LDSECTION = --section-start=.text=0x7e00
|
||||
atmega328: $(PROGRAM)_atmega328.hex
|
||||
atmega328: $(PROGRAM)_atmega328.lst
|
||||
|
||||
atmega328_isp: atmega328
|
||||
atmega328_isp: TARGET = atmega328
|
||||
atmega328_isp: MCU_TARGET = atmega328p
|
||||
atmega328_isp: HFUSE = DE # 512 byte boot
|
||||
atmega328_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms
|
||||
atmega328_isp: EFUSE = 05 # 2.7V brownout
|
||||
atmega328_isp: isp
|
||||
|
||||
# 8MHz clocked platforms
|
||||
#
|
||||
# These are capable of 115200 baud
|
||||
#
|
||||
|
||||
lilypad: TARGET = lilypad
|
||||
lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200'
|
||||
lilypad: AVR_FREQ = 8000000L
|
||||
lilypad: $(PROGRAM)_lilypad.hex
|
||||
lilypad: $(PROGRAM)_lilypad.lst
|
||||
|
||||
lilypad_isp: lilypad
|
||||
lilypad_isp: TARGET = lilypad
|
||||
lilypad_isp: HFUSE = DD # 2.7V brownout
|
||||
lilypad_isp: LFUSE = E2 # Internal 8MHz osc (8MHz) Slow rising power
|
||||
lilypad_isp: EFUSE = 02 # 512 byte boot
|
||||
lilypad_isp: isp
|
||||
|
||||
lilypad_resonator: TARGET = lilypad_resonator
|
||||
lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200'
|
||||
lilypad_resonator: AVR_FREQ = 8000000L
|
||||
lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex
|
||||
lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst
|
||||
|
||||
lilypad_resonator_isp: lilypad_resonator
|
||||
lilypad_resonator_isp: TARGET = lilypad_resonator
|
||||
lilypad_resonator_isp: HFUSE = DD # 2.7V brownout
|
||||
lilypad_resonator_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
|
||||
lilypad_resonator_isp: EFUSE = 02 # 512 byte boot
|
||||
lilypad_resonator_isp: isp
|
||||
|
||||
pro8: TARGET = pro_8MHz
|
||||
pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=115200'
|
||||
pro8: AVR_FREQ = 8000000L
|
||||
pro8: $(PROGRAM)_pro_8MHz.hex
|
||||
pro8: $(PROGRAM)_pro_8MHz.lst
|
||||
|
||||
pro8_isp: pro8
|
||||
pro8_isp: TARGET = pro_8MHz
|
||||
pro8_isp: HFUSE = DD # 2.7V brownout
|
||||
pro8_isp: LFUSE = C6 # Full swing xtal (20MHz) 258CK/14CK+4.1ms
|
||||
pro8_isp: EFUSE = 02 # 512 byte boot
|
||||
pro8_isp: isp
|
||||
|
||||
atmega328_pro8: TARGET = atmega328_pro_8MHz
|
||||
atmega328_pro8: MCU_TARGET = atmega328p
|
||||
atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200'
|
||||
atmega328_pro8: AVR_FREQ = 8000000L
|
||||
atmega328_pro8: LDSECTION = --section-start=.text=0x7e00
|
||||
atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex
|
||||
atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst
|
||||
|
||||
atmega328_pro8_isp: atmega328_pro8
|
||||
atmega328_pro8_isp: TARGET = atmega328_pro_8MHz
|
||||
atmega328_pro8_isp: MCU_TARGET = atmega328p
|
||||
atmega328_pro8_isp: HFUSE = DE # 512 byte boot
|
||||
atmega328_pro8_isp: LFUSE = FF # Low power xtal (16MHz) 16KCK/14CK+65ms
|
||||
atmega328_pro8_isp: EFUSE = 05 # 2.7V brownout
|
||||
atmega328_pro8_isp: isp
|
||||
|
||||
# 1MHz clocked platforms
|
||||
#
|
||||
# These are capable of 9600 baud
|
||||
#
|
||||
|
||||
luminet: TARGET = luminet
|
||||
luminet: MCU_TARGET = attiny84
|
||||
luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600'
|
||||
luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION'
|
||||
luminet: AVR_FREQ = 1000000L
|
||||
luminet: LDSECTION = --section-start=.text=0x1d00
|
||||
luminet: $(PROGRAM)_luminet.hex
|
||||
luminet: $(PROGRAM)_luminet.lst
|
||||
|
||||
luminet_isp: luminet
|
||||
luminet_isp: TARGET = luminet
|
||||
luminet_isp: MCU_TARGET = attiny84
|
||||
luminet_isp: HFUSE = DF # Brownout disabled
|
||||
luminet_isp: LFUSE = 62 # 1MHz internal oscillator, slowly rising power
|
||||
luminet_isp: EFUSE = FE # Self-programming enable
|
||||
luminet_isp: isp
|
||||
|
||||
isp: $(TARGET)
|
||||
$(ISPFUSES)
|
||||
$(ISPFLASH)
|
||||
|
||||
isp-stk500: $(PROGRAM)_$(TARGET).hex
|
||||
$(STK500-1)
|
||||
$(STK500-2)
|
||||
|
||||
%.elf: $(OBJ)
|
||||
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
|
||||
|
||||
clean:
|
||||
rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
|
||||
|
||||
%.lst: %.elf
|
||||
$(OBJDUMP) -h -S $< > $@
|
||||
|
||||
%.hex: %.elf
|
||||
$(OBJCOPY) -j .text -j .data -O ihex $< $@
|
||||
|
||||
%.srec: %.elf
|
||||
$(OBJCOPY) -j .text -j .data -O srec $< $@
|
||||
|
||||
%.bin: %.elf
|
||||
$(OBJCOPY) -j .text -j .data -O binary $< $@
|
Reference in a new issue