arduino-0022

arduino-0022-linux-x64/libraries/Ethernet/examples/ChatServer/ChatServer.pde

@@ -0,0 +1,63 @@
+/*
+ Chat  Server
+ 
+ A simple server that distributes any incoming messages to all
+ connected clients.  To use telnet to  your device's IP address and type.
+ You can see the client's input in the serial monitor as well.
+ Using an Arduino Wiznet Ethernet shield. 
+ 
+ Circuit:
+ * Ethernet shield attached to pins 10, 11, 12, 13
+ * Analog inputs attached to pins A0 through A5 (optional)
+ 
+ created 18 Dec 2009
+ by David A. Mellis
+ modified 10 August 2010
+ by Tom Igoe
+ 
+ */
+
+#include <SPI.h>
+#include <Ethernet.h>
+
+// Enter a MAC address and IP address for your controller below.
+// The IP address will be dependent on your local network.
+// gateway and subnet are optional:
+byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
+byte ip[] = { 192,168,1, 177 };
+byte gateway[] = { 192,168,1, 1 };
+byte subnet[] = { 255, 255, 0, 0 };
+
+// telnet defaults to port 23
+Server server(23);
+boolean gotAMessage = false; // whether or not you got a message from the client yet
+
+void setup() {
+  // initialize the ethernet device
+  Ethernet.begin(mac, ip, gateway, subnet);
+  // start listening for clients
+  server.begin();
+  // open the serial port
+  Serial.begin(9600);
+}
+
+void loop() {
+  // wait for a new client:
+  Client client = server.available();
+  
+  // when the client sends the first byte, say hello:
+  if (client) {
+    if (!gotAMessage) {
+      Serial.println("We have a new client");
+      client.println("Hello, client!"); 
+      gotAMessage = true;
+    }
+    
+    // read the bytes incoming from the client:
+    char thisChar = client.read();
+    // echo the bytes back to the client:
+    server.write(thisChar);
+    // echo the bytes to the server as well:
+    Serial.print(thisChar);
+  }
+}