use arduino's avrdue and -b19200 for now
This commit is contained in:
parent
0de9d4db1e
commit
e3a6a82b57
1 changed files with 9 additions and 5 deletions
|
@ -83,8 +83,8 @@ LDFLAGS = $(EXTMEMOPTS) $(LDMAP) $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
|||
|
||||
# Programming support using avrdude. Settings and variables.
|
||||
|
||||
AVRDUDE_PROGRAMMER = stk500
|
||||
AVRDUDE_PORT = usb
|
||||
AVRDUDE_PROGRAMMER = stk500v1
|
||||
AVRDUDE_PORT = /dev/ttyUSB0
|
||||
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
||||
|
@ -105,7 +105,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
|||
#AVRDUDE_VERBOSE = -v -v
|
||||
|
||||
AVRDUDE_BASIC = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
||||
AVRDUDE_FLAGS = $(AVRDUDE_BASIC) $(AVRDUDE_NO_VERIFY) $(AVRDUDE_VERBOSE) $(AVRDUDE_ERASE_COUNTER)
|
||||
AVRDUDE_FLAGS = $(AVRDUDE_BASIC) $(AVRDUDE_NO_VERIFY) $(AVRDUDE_VERBOSE) $(AVRDUDE_ERASE_COUNTER) -b19200
|
||||
|
||||
|
||||
CC = avr-gcc
|
||||
|
@ -113,7 +113,8 @@ OBJCOPY = avr-objcopy
|
|||
OBJDUMP = avr-objdump
|
||||
SIZE = avr-size
|
||||
NM = avr-nm
|
||||
AVRDUDE = avrdude
|
||||
#AVRDUDE = avrdude
|
||||
AVRDUDE = /home/entropia/Desktop/arduinisten/arduino-0018-linux-x64/hardware/tools/avrdude -C/home/entropia/Desktop/arduinisten/arduino-0018-linux-x64/hardware/tools/avrdude.conf
|
||||
REMOVE = rm -f
|
||||
MV = mv -f
|
||||
|
||||
|
@ -140,9 +141,12 @@ eep: $(TARGET).eep
|
|||
lss: $(TARGET).lss
|
||||
sym: $(TARGET).sym
|
||||
|
||||
# Reset Arduino
|
||||
program-reset:
|
||||
perl -MDevice::SerialPort -e "Device::SerialPort->new('$(AVRDUDE_PORT)')->pulse_dtr_on(100);"
|
||||
|
||||
# Program the device.
|
||||
program: $(TARGET).hex $(TARGET).eep
|
||||
program: $(TARGET).hex $(TARGET).eep program-reset
|
||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
||||
|
||||
|
||||
|
|
Reference in a new issue