arduino-0018-linux-x64
This commit is contained in:
parent
8e4748e499
commit
ed785c5798
426 changed files with 76732 additions and 0 deletions
|
@ -0,0 +1,48 @@
|
|||
/*
|
||||
Analog Input
|
||||
Demonstrates analog input by reading an analog sensor on analog pin 0 and
|
||||
turning on and off a light emitting diode(LED) connected to digital pin 13.
|
||||
The amount of time the LED will be on and off depends on
|
||||
the value obtained by analogRead().
|
||||
|
||||
The circuit:
|
||||
* Potentiometer attached to analog input 0
|
||||
* center pin of the potentiometer to the analog pin
|
||||
* one side pin (either one) to ground
|
||||
* the other side pin to +5V
|
||||
* LED anode (long leg) attached to digital output 13
|
||||
* LED cathode (short leg) attached to ground
|
||||
|
||||
* Note: because most Arduinos have a built-in LED attached
|
||||
to pin 13 on the board, the LED is optional.
|
||||
|
||||
|
||||
Created by David Cuartielles
|
||||
Modified 16 Jun 2009
|
||||
By Tom Igoe
|
||||
|
||||
http://arduino.cc/en/Tutorial/AnalogInput
|
||||
|
||||
*/
|
||||
|
||||
int sensorPin = 0; // select the input pin for the potentiometer
|
||||
int ledPin = 13; // select the pin for the LED
|
||||
int sensorValue = 0; // variable to store the value coming from the sensor
|
||||
|
||||
void setup() {
|
||||
// declare the ledPin as an OUTPUT:
|
||||
pinMode(ledPin, OUTPUT);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
// read the value from the sensor:
|
||||
sensorValue = analogRead(sensorPin);
|
||||
// turn the ledPin on
|
||||
digitalWrite(ledPin, HIGH);
|
||||
// stop the program for <sensorValue> milliseconds:
|
||||
delay(sensorValue);
|
||||
// turn the ledPin off:
|
||||
digitalWrite(ledPin, LOW);
|
||||
// stop the program for for <sensorValue> milliseconds:
|
||||
delay(sensorValue);
|
||||
}
|
Reference in a new issue