move stuff

projekte/i2c/i2c_fnord/i2c_fnord.pde

@@ -0,0 +1,38 @@
+// Wire Master Writer
+// by Nicholas Zambetti <http://www.zambetti.com>
+
+// Demonstrates use of the Wire library
+// Writes data to an I2C/TWI slave device
+// Refer to the "Wire Slave Receiver" example for use with this
+
+// Created 29 March 2006
+
+#include <Wire.h>
+
+void setup()
+{
+  Wire.begin(); // join i2c bus (address optional for master)
+  Serial.begin(9600);
+}
+
+byte x = 0;
+
+void loop()
+{
+
+  Wire.beginTransmission(4); // transmit to device #4
+  Wire.send("x is ");        // sends five bytes
+  Wire.send(x);              // sends one byte  
+  Wire.endTransmission();    // stop transmitting
+
+  //Wire.requestFrom(2,2);
+  while(Wire.available()) // loop through all but the last
+  {
+    char c = Wire.receive(); // receive byte as a character
+    Serial.print(c);         // print the character
+  }
+
+  x++;
+  delay(500);
+  Serial.print(".");
+}

projekte/lc-display/arduinination/arduinination.pde

@@ -0,0 +1,38 @@
+#include <LCD4Bit.h>
+LCD4Bit lcd = LCD4Bit(2);
+
+void setup() {
+  lcd.init();
+  lcd.clear();
+  lcd.printIn("World Arduinination in progress...");
+}
+
+int i = 0,j = 0, dir = 1;
+char bfr[4];
+
+void loop() {
+  digitalWrite(13, HIGH);
+
+  lcd.cursorTo(2, 0);
+  itoa(i, bfr, 10);
+  lcd.printIn(bfr);
+  lcd.printIn("%");
+  
+  lcd.cursorTo(2, 4);
+  
+  for(j=0; j < (i / 3); j++)
+      lcd.print(255);
+  for(j=i/3; j < 100/3; j++)
+      lcd.printIn(" ");
+
+ 
+  if(i >= 98)
+    dir = -1;
+  if(dir == -1 && i <= 80)
+    dir = 1;
+    
+  i += dir;
+  
+  digitalWrite(13,LOW);
+  delay(100);
+}