arduino-0018-windows

arduino-0018-windows/hardware/arduino/bootloaders/atmega8/Makefile

@@ -0,0 +1,88 @@
+# Makefile for ATmegaBOOT
+# E.Lins, 2004-10-14
+
+# program name should not be changed...
+PROGRAM    = ATmegaBOOT
+
+PRODUCT=atmega8
+
+# enter the parameters for the UISP isp tool
+ISPPARAMS  = -dprog=stk500 -dserial=$(SERIAL) -dspeed=115200
+
+
+#DIRAVR = /usr/local/avr
+DIRAVRBIN = $(DIRAVR)/bin
+DIRAVRUTILS = $(DIRAVR)/utils/bin
+DIRINC = $(DIRAVR)/include
+DIRLIB = $(DIRAVR)/avr/lib
+
+
+MCU_TARGET = atmega8
+LDSECTION  = --section-start=.text=0x1c00
+FUSE_L     = 0xdf
+FUSE_H     = 0xca
+ISPFUSES   = $(DIRAVRBIN)/uisp -dpart=ATmega8 $(ISPPARAMS) --wr_fuse_l=$(FUSE_L) --wr_fuse_h=$(FUSE_H)
+ISPFLASH   = $(DIRAVRBIN)/uisp -dpart=ATmega8 $(ISPPARAMS) --erase --upload if=$(PROGRAM).hex -v
+
+
+OBJ        = $(PROGRAM).o
+OPTIMIZE   = -Os
+
+DEFS       = -DF_CPU=16000000 -DBAUD_RATE=19200
+LIBS       =
+
+CC         = $(DIRAVRBIN)/avr-gcc
+
+
+# Override is only needed by avr-lib build system.
+
+override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -D$(PRODUCT) $(DEFS) -I$(DIRINC)
+override LDFLAGS       = -Wl,-Map,$(PROGRAM).map,$(LDSECTION)
+
+OBJCOPY        = $(DIRAVRBIN)/avr-objcopy
+OBJDUMP        = $(DIRAVRBIN)/avr-objdump
+SIZE           = $(DIRAVRBIN)/avr-size
+
+all: $(PROGRAM).elf lst text asm size
+
+isp: $(PROGRAM).hex
+	$(ISPFUSES)
+	$(ISPFLASH)
+
+$(PROGRAM).elf: $(OBJ)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
+
+clean:
+	rm -rf *.s
+	rm -rf *.o *.elf
+	rm -rf *.lst *.map
+
+asm: $(PROGRAM).s
+
+%.s: %.c
+	$(CC) -S $(CFLAGS) -g1 $^
+
+lst:  $(PROGRAM).lst
+
+%.lst: %.elf
+	$(OBJDUMP) -h -S $< > $@
+
+size: $(PROGRAM).hex
+	$(SIZE) $^
+
+# Rules for building the .text rom images
+
+text: hex bin srec
+
+hex:  $(PROGRAM).hex
+bin:  $(PROGRAM).bin
+srec: $(PROGRAM).srec
+
+%.hex: %.elf
+	$(OBJCOPY) -j .text -j .data -O ihex $< $@
+
+%.srec: %.elf
+	$(OBJCOPY) -j .text -j .data -O srec $< $@
+
+%.bin: %.elf
+	$(OBJCOPY) -j .text -j .data -O binary $< $@