You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
63 lines
1.7 KiB
Plaintext
63 lines
1.7 KiB
Plaintext
/*
|
|
Chat Server
|
|
|
|
A simple server that distributes any incoming messages to all
|
|
connected clients. To use telnet to your device's IP address and type.
|
|
You can see the client's input in the serial monitor as well.
|
|
Using an Arduino Wiznet Ethernet shield.
|
|
|
|
Circuit:
|
|
* Ethernet shield attached to pins 10, 11, 12, 13
|
|
* Analog inputs attached to pins A0 through A5 (optional)
|
|
|
|
created 18 Dec 2009
|
|
by David A. Mellis
|
|
modified 10 August 2010
|
|
by Tom Igoe
|
|
|
|
*/
|
|
|
|
#include <SPI.h>
|
|
#include <Ethernet.h>
|
|
|
|
// Enter a MAC address and IP address for your controller below.
|
|
// The IP address will be dependent on your local network.
|
|
// gateway and subnet are optional:
|
|
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
|
|
byte ip[] = { 192,168,1, 177 };
|
|
byte gateway[] = { 192,168,1, 1 };
|
|
byte subnet[] = { 255, 255, 0, 0 };
|
|
|
|
// telnet defaults to port 23
|
|
Server server(23);
|
|
boolean gotAMessage = false; // whether or not you got a message from the client yet
|
|
|
|
void setup() {
|
|
// initialize the ethernet device
|
|
Ethernet.begin(mac, ip, gateway, subnet);
|
|
// start listening for clients
|
|
server.begin();
|
|
// open the serial port
|
|
Serial.begin(9600);
|
|
}
|
|
|
|
void loop() {
|
|
// wait for a new client:
|
|
Client client = server.available();
|
|
|
|
// when the client sends the first byte, say hello:
|
|
if (client) {
|
|
if (!gotAMessage) {
|
|
Serial.println("We have a new client");
|
|
client.println("Hello, client!");
|
|
gotAMessage = true;
|
|
}
|
|
|
|
// read the bytes incoming from the client:
|
|
char thisChar = client.read();
|
|
// echo the bytes back to the client:
|
|
server.write(thisChar);
|
|
// echo the bytes to the server as well:
|
|
Serial.print(thisChar);
|
|
}
|
|
} |