neingeist
/
arduinisten
Archived
1
0
Fork 0
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.

129 lines
3.2 KiB
ArmAsm

/*
* ----------------------------------------------------------------------------
* "THE BEER-WARE LICENSE" (Revision 42):
* Joerg Wunsch wrote this file. As long as you retain this notice you
* can do whatever you want with this stuff. If we meet some day, and you think
* this stuff is worth it, you can buy me a beer in return. Joerg Wunsch
* ----------------------------------------------------------------------------
*
* Demo combining C and assembly source files.
*
* $Id: isrs.S,v 1.1 2006/08/29 19:45:06 joerg_wunsch Exp $
*/
/*
* This file contains the interrupt service routine implementations
* when compiling the project for the ATtiny13 target.
*/
#include <avr/io.h>
#include "project.h"
#if defined(__AVR_ATtiny13__)
/*
* Timer 0 hit TOP (0xff), i.e. it turns from up-counting
* into down-counting direction.
*/
.global TIM0_COMPA_vect
TIM0_COMPA_vect:
in sreg_save, _SFR_IO_ADDR(SREG)
inc counter_hi
clr flags
out _SFR_IO_ADDR(SREG), sreg_save
reti
/*
* Timer 0 hit BOTTOM (0x00), i.e. it turns from down-counting
* into up-counting direction.
*/
.global TIM0_OVF_vect
TIM0_OVF_vect:
in sreg_save, _SFR_IO_ADDR(SREG)
inc counter_hi
ser flags
out _SFR_IO_ADDR(SREG), sreg_save
reti
;;; one 16-bit word to store our rising edge's timestamp
.lcomm starttime.0, 2
.extern pwm_incoming
.extern intbits
.global PCINT0_vect
PCINT0_vect:
in sreg_save, _SFR_IO_ADDR(SREG)
;; save our working registers
push r18
push r19
push r20
push r21
;; Now that we are ready to fetch the current
;; value of TCNT0, allow interrupts for a
;; moment. As the effect of the SEI will be
;; deferred by one instruction, any possible
;; rollover of TCNT0 (hitting BOTTOM when
;; counting down, or MAX when counting up) will
;; allow the above ISRs to trigger right here,
;; and update their status, so our combined
;; 16-bit time from [counter_hi, TCNT0] will
;; be correct.
sei
in r20, _SFR_IO_ADDR(TCNT0)
cli
;; Now, make our working copy of the status,
;; so we can re-enable interrupts again.
mov r21, counter_hi
mov r19, flags
sei
;; what direction were we counting?
sbrs r19, 0
;; we are down-counting, invert TCNT0
com r20
;; at this point, r21:20 has our current
;; 16-bit time
;; now, look which of the edges triggered
;; our pin-change interrupt
sbis _SFR_IO_ADDR(PINB), 4
rjmp 10f
;; rising edge detected, just record starttime
sts (starttime.0) + 1, r21
sts starttime.0, r20
rjmp 99f ; we are done here
;; Falling edge: compute pulse width, store it
;; into pwm_incoming, disable pin-change
;; interrupt until the upper layers had a chance
;; to fetch the result.
10: in r18, _SFR_IO_ADDR(GIMSK)
andi r18, ~(1 << PCIE)
out _SFR_IO_ADDR(GIMSK), r18
;; pwm_incoming = current_time - starttime
lds r19, (starttime.0) + 1
lds r18, starttime.0
sub r20, r18
sbc r21, r19
sts (pwm_incoming) + 1, r21
sts pwm_incoming, r20
;; signal upper layer
lds r18, intbits
ori r18, 1
sts intbits, r18
99:
pop r21
pop r20
pop r19
pop r18
out _SFR_IO_ADDR(SREG), sreg_save
reti
#endif /* ATtiny13 */