You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1194 lines
25 KiB
Plaintext
1194 lines
25 KiB
Plaintext
/*
|
|
Serial Call and Response
|
|
Language: Wiring/Arduino
|
|
|
|
This program sends an ASCII A (byte of value 65) on startup
|
|
and repeats that until it gets some data in.
|
|
Then it waits for a byte in the serial port, and
|
|
sends three sensor values whenever it gets a byte in.
|
|
|
|
Thanks to Greg Shakar and Scott Fitzgerald for the improvements
|
|
|
|
The circuit:
|
|
* potentiometers attached to analog inputs 0 and 1
|
|
* pushbutton attached to digital I/O 2
|
|
|
|
|
|
http://www.arduino.cc/en/Tutorial/SerialCallResponse
|
|
|
|
Created 26 Sept. 2005
|
|
by Tom Igoe
|
|
Modified 14 April 2009
|
|
by Tom Igoe and Scott Fitzgerald
|
|
*/
|
|
|
|
int firstSensor = 0; // first analog sensor
|
|
int secondSensor = 0; // second analog sensor
|
|
int thirdSensor = 0; // digital sensor
|
|
int inByte = 0; // incoming serial byte
|
|
|
|
void setup()
|
|
{
|
|
// start serial port at 9600 bps:
|
|
Serial.begin(9600);
|
|
pinMode(2, INPUT); // digital sensor is on digital pin 2
|
|
establishContact(); // send a byte to establish contact until receiver responds
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
// if we get a valid byte, read analog ins:
|
|
if (Serial.available() > 0) {
|
|
// get incoming byte:
|
|
inByte = Serial.read();
|
|
// read first analog input, divide by 4 to make the range 0-255:
|
|
firstSensor = analogRead(0)/4;
|
|
// delay 10ms to let the ADC recover:
|
|
delay(10);
|
|
// read second analog input, divide by 4 to make the range 0-255:
|
|
secondSensor = analogRead(1)/4;
|
|
// read switch, map it to 0 or 255L
|
|
thirdSensor = map(digitalRead(2), 0, 1, 0, 255);
|
|
// send sensor values:
|
|
Serial.print(firstSensor, BYTE);
|
|
Serial.print(secondSensor, BYTE);
|
|
Serial.print(thirdSensor, BYTE);
|
|
}
|
|
}
|
|
|
|
void establishContact() {
|
|
while (Serial.available() <= 0) {
|
|
Serial.print('A', BYTE); // send a capital A
|
|
delay(300);
|
|
}
|
|
}
|
|
|
|
/*
|
|
Processing sketch to run with this example:
|
|
|
|
import processing.serial.*;
|
|
|
|
int bgcolor; // Background color
|
|
int fgcolor; // Fill color
|
|
Serial myPort; // The serial port
|
|
int[] serialInArray = new int[3]; // Where we'll put what we receive
|
|
int serialCount = 0; // A count of how many bytes we receive
|
|
int xpos, ypos; // Starting position of the ball
|
|
boolean firstContact = false; // Whether we've heard from the microcontroller
|
|
|
|
void setup() {
|
|
size(256, 256); // Stage size
|
|
noStroke(); // No border on the next thing drawn
|
|
|
|
// Set the starting position of the ball (middle of the stage)
|
|
xpos = width/2;
|
|
ypos = height/2;
|
|
|
|
// Print a list of the serial ports, for debugging purposes:
|
|
println(Serial.list());
|
|
|
|
// I know that the first port in the serial list on my mac
|
|
// is always my FTDI adaptor, so I open Serial.list()[0].
|
|
// On Windows machines, this generally opens COM1.
|
|
// Open whatever port is the one you're using.
|
|
String portName = Serial.list()[0];
|
|
myPort = new Serial(this, portName, 9600);
|
|
}
|
|
|
|
void draw() {
|
|
background(bgcolor);
|
|
fill(fgcolor);
|
|
// Draw the shape
|
|
ellipse(xpos, ypos, 20, 20);
|
|
}
|
|
|
|
void serialEvent(Serial myPort) {
|
|
// read a byte from the serial port:
|
|
int inByte = myPort.read();
|
|
// if this is the first byte received, and it's an A,
|
|
// clear the serial buffer and note that you've
|
|
// had first contact from the microcontroller.
|
|
// Otherwise, add the incoming byte to the array:
|
|
if (firstContact == false) {
|
|
if (inByte == 'A') {
|
|
myPort.clear(); // clear the serial port buffer
|
|
firstContact = true; // you've had first contact from the microcontroller
|
|
myPort.write('A'); // ask for more
|
|
}
|
|
}
|
|
else {
|
|
// Add the latest byte from the serial port to array:
|
|
serialInArray[serialCount] = inByte;
|
|
serialCount++;
|
|
|
|
// If we have 3 bytes:
|
|
if (serialCount > 2 ) {
|
|
xpos = serialInArray[0];
|
|
ypos = serialInArray[1];
|
|
fgcolor = serialInArray[2];
|
|
|
|
// print the values (for debugging purposes only):
|
|
println(xpos + "\t" + ypos + "\t" + fgcolor);
|
|
|
|
// Send a capital A to request new sensor readings:
|
|
myPort.write('A');
|
|
// Reset serialCount:
|
|
serialCount = 0;
|
|
}
|
|
}
|
|
}
|
|
*/
|
|
|
|
/*
|
|
Max/MSP version 5 patch to run with this example:
|
|
|
|
{
|
|
"boxes" : [ {
|
|
"box" : {
|
|
"maxclass" : "message",
|
|
"text" : "65",
|
|
"patching_rect" : [ 339.0, 466.0, 32.5, 18.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-9",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "sel 1",
|
|
"patching_rect" : [ 339.0, 437.0, 36.0, 20.0 ],
|
|
"numoutlets" : 2,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "bang", "" ],
|
|
"id" : "obj-6",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "Serial Call-Response \n\nSends a byte out the serial port, and reads 3 bytes in. Sets foregound color, xpos, and ypos of a circle using the values returned from the serial port. \n\nNote: This patch assumes that the device on the other end of the serial port is going to send a single byte of value 65 (ASCII A) on startup. The sketch waits for that byte, then sends an ASCII A whenever it wants more data. \n\ncreated 14 Apr 2009\nby Scott Fitzgerald and Tom Igoe",
|
|
"linecount" : 11,
|
|
"patching_rect" : [ 404.0, 52.0, 464.0, 158.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-5",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "trigger (or [t]) forces right-left conventions. All the drawing and processing will happen before Max requests new values. When this trigger fires, it sends an ASCII A to ask Arduino for new values.",
|
|
"linecount" : 3,
|
|
"patching_rect" : [ 239.0, 505.0, 425.0, 48.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-65",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "reinitializes the gates when turned on and off",
|
|
"linecount" : 2,
|
|
"patching_rect" : [ 170.0, 370.0, 135.0, 34.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-64",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "checks for the ascii value of \"A\" to begin cominucation. After initial communication is made, this block shuts down.",
|
|
"linecount" : 3,
|
|
"patching_rect" : [ 460.0, 355.0, 233.0, 48.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-63",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "p \"draw the circle\"",
|
|
"patching_rect" : [ 217.0, 645.0, 269.0, 19.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 10.0,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-62",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 3,
|
|
"patcher" : {
|
|
"fileversion" : 1,
|
|
"rect" : [ 54.0, 94.0, 640.0, 480.0 ],
|
|
"bglocked" : 0,
|
|
"defrect" : [ 54.0, 94.0, 640.0, 480.0 ],
|
|
"openrect" : [ 0.0, 0.0, 0.0, 0.0 ],
|
|
"openinpresentation" : 0,
|
|
"default_fontsize" : 10.0,
|
|
"default_fontface" : 0,
|
|
"default_fontname" : "Verdana",
|
|
"gridonopen" : 0,
|
|
"gridsize" : [ 25.0, 25.0 ],
|
|
"gridsnaponopen" : 0,
|
|
"toolbarvisible" : 1,
|
|
"boxanimatetime" : 200,
|
|
"imprint" : 0,
|
|
"boxes" : [ {
|
|
"box" : {
|
|
"maxclass" : "message",
|
|
"text" : "frgb 255 255 255",
|
|
"patching_rect" : [ 375.0, 150.0, 98.0, 18.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 11.595187,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-47",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "message",
|
|
"text" : "frgb 0 0 0",
|
|
"patching_rect" : [ 275.0, 125.0, 59.0, 18.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 11.595187,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-46",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "sel 255 0",
|
|
"patching_rect" : [ 300.0, 100.0, 66.0, 21.0 ],
|
|
"numoutlets" : 3,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "bang", "bang", "" ],
|
|
"id" : "obj-45",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "pack 0 0 0 0",
|
|
"patching_rect" : [ 50.0, 125.0, 180.0, 21.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-43",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 4
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "+ 10",
|
|
"patching_rect" : [ 200.0, 100.0, 40.0, 21.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "int" ],
|
|
"id" : "obj-42",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "+ 10",
|
|
"patching_rect" : [ 75.0, 100.0, 40.0, 21.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "int" ],
|
|
"id" : "obj-41",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "message",
|
|
"text" : "clear, paintoval $1 $2 $3 $4",
|
|
"patching_rect" : [ 50.0, 150.0, 152.0, 18.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 11.595187,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-40",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "inlet",
|
|
"patching_rect" : [ 57.5, 40.0, 25.0, 25.0 ],
|
|
"numoutlets" : 1,
|
|
"outlettype" : [ "int" ],
|
|
"id" : "obj-58",
|
|
"numinlets" : 0,
|
|
"comment" : ""
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "inlet",
|
|
"patching_rect" : [ 120.0, 40.0, 25.0, 25.0 ],
|
|
"numoutlets" : 1,
|
|
"outlettype" : [ "int" ],
|
|
"id" : "obj-59",
|
|
"numinlets" : 0,
|
|
"comment" : ""
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "inlet",
|
|
"patching_rect" : [ 300.0, 40.0, 25.0, 25.0 ],
|
|
"numoutlets" : 1,
|
|
"outlettype" : [ "int" ],
|
|
"id" : "obj-60",
|
|
"numinlets" : 0,
|
|
"comment" : ""
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "outlet",
|
|
"patching_rect" : [ 228.333344, 228.0, 25.0, 25.0 ],
|
|
"numoutlets" : 0,
|
|
"id" : "obj-61",
|
|
"numinlets" : 1,
|
|
"comment" : ""
|
|
}
|
|
|
|
}
|
|
],
|
|
"lines" : [ {
|
|
"patchline" : {
|
|
"source" : [ "obj-47", 0 ],
|
|
"destination" : [ "obj-61", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-46", 0 ],
|
|
"destination" : [ "obj-61", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-40", 0 ],
|
|
"destination" : [ "obj-61", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-60", 0 ],
|
|
"destination" : [ "obj-45", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-59", 0 ],
|
|
"destination" : [ "obj-42", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-59", 0 ],
|
|
"destination" : [ "obj-43", 1 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-58", 0 ],
|
|
"destination" : [ "obj-41", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-58", 0 ],
|
|
"destination" : [ "obj-43", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-42", 0 ],
|
|
"destination" : [ "obj-43", 3 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-41", 0 ],
|
|
"destination" : [ "obj-43", 2 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-45", 1 ],
|
|
"destination" : [ "obj-47", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-45", 0 ],
|
|
"destination" : [ "obj-46", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-43", 0 ],
|
|
"destination" : [ "obj-40", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
]
|
|
}
|
|
,
|
|
"saved_object_attributes" : {
|
|
"fontface" : 0,
|
|
"fontsize" : 10.0,
|
|
"default_fontface" : 0,
|
|
"default_fontname" : "Verdana",
|
|
"default_fontsize" : 10.0,
|
|
"fontname" : "Verdana",
|
|
"globalpatchername" : ""
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "0",
|
|
"patching_rect" : [ 310.0, 378.0, 32.5, 20.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "int" ],
|
|
"id" : "obj-57",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "!- 1",
|
|
"patching_rect" : [ 385.0, 436.0, 32.5, 20.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "int" ],
|
|
"id" : "obj-55",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "gate 1 1",
|
|
"patching_rect" : [ 385.0, 355.0, 54.0, 20.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-54",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "toggle",
|
|
"patching_rect" : [ 385.0, 405.0, 20.0, 20.0 ],
|
|
"numoutlets" : 1,
|
|
"outlettype" : [ "int" ],
|
|
"id" : "obj-53",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "gate 1 0",
|
|
"patching_rect" : [ 194.0, 455.0, 54.0, 20.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-50",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "sel 65",
|
|
"patching_rect" : [ 385.0, 380.0, 43.0, 20.0 ],
|
|
"numoutlets" : 2,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "bang", "" ],
|
|
"id" : "obj-48",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "lcd",
|
|
"patching_rect" : [ 217.0, 695.0, 256.0, 256.0 ],
|
|
"numoutlets" : 4,
|
|
"outlettype" : [ "list", "list", "int", "" ],
|
|
"id" : "obj-39",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "t 65 l",
|
|
"patching_rect" : [ 194.0, 504.0, 42.0, 21.0 ],
|
|
"numoutlets" : 2,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "int", "" ],
|
|
"id" : "obj-35",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "val3",
|
|
"patching_rect" : [ 535.0, 604.0, 37.0, 21.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-1",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "number",
|
|
"patching_rect" : [ 467.0, 604.0, 56.0, 21.0 ],
|
|
"numoutlets" : 2,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "int", "bang" ],
|
|
"id" : "obj-3",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "val2",
|
|
"patching_rect" : [ 410.0, 605.0, 37.0, 21.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-18",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "val1",
|
|
"patching_rect" : [ 282.0, 605.0, 37.0, 21.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-20",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "number",
|
|
"patching_rect" : [ 342.0, 605.0, 56.0, 21.0 ],
|
|
"numoutlets" : 2,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "int", "bang" ],
|
|
"id" : "obj-22",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "number",
|
|
"patching_rect" : [ 217.0, 605.0, 55.0, 21.0 ],
|
|
"numoutlets" : 2,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "int", "bang" ],
|
|
"id" : "obj-23",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "unpack 0 0 0",
|
|
"patching_rect" : [ 217.0, 570.0, 269.0, 21.0 ],
|
|
"numoutlets" : 3,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "int", "int", "int" ],
|
|
"id" : "obj-29",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "zl group 3",
|
|
"patching_rect" : [ 194.0, 480.0, 71.0, 21.0 ],
|
|
"numoutlets" : 2,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "", "" ],
|
|
"id" : "obj-31",
|
|
"fontname" : "Verdana",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "select 0 1",
|
|
"patching_rect" : [ 312.0, 200.0, 62.0, 20.0 ],
|
|
"numoutlets" : 3,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "bang", "bang", "" ],
|
|
"id" : "obj-30",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "click here to close the serial port",
|
|
"patching_rect" : [ 360.0, 291.0, 206.0, 20.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-26",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "click here to open the serial port",
|
|
"patching_rect" : [ 385.0, 265.0, 206.0, 20.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-27",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "message",
|
|
"text" : "close",
|
|
"patching_rect" : [ 312.0, 291.0, 39.0, 18.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-21",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "message",
|
|
"text" : "port a",
|
|
"patching_rect" : [ 334.0, 265.0, 41.0, 18.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-19",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "Click here to get a list of serial ports",
|
|
"patching_rect" : [ 405.0, 239.0, 207.0, 20.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-2",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "toggle",
|
|
"patching_rect" : [ 229.0, 155.0, 22.0, 22.0 ],
|
|
"numoutlets" : 1,
|
|
"outlettype" : [ "int" ],
|
|
"id" : "obj-11",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "qmetro 10",
|
|
"patching_rect" : [ 229.0, 200.0, 65.0, 20.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "bang" ],
|
|
"id" : "obj-12",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "message",
|
|
"text" : "print",
|
|
"patching_rect" : [ 354.0, 239.0, 36.0, 18.0 ],
|
|
"numoutlets" : 1,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "" ],
|
|
"id" : "obj-13",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 2
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "newobj",
|
|
"text" : "serial a 9600",
|
|
"patching_rect" : [ 229.0, 315.0, 84.0, 20.0 ],
|
|
"numoutlets" : 2,
|
|
"fontsize" : 12.0,
|
|
"outlettype" : [ "int", "" ],
|
|
"id" : "obj-14",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "Read serial input buffer every 10 milliseconds",
|
|
"linecount" : 2,
|
|
"patching_rect" : [ 13.0, 192.0, 210.0, 34.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-15",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
, {
|
|
"box" : {
|
|
"maxclass" : "comment",
|
|
"text" : "Click to start",
|
|
"patching_rect" : [ 256.0, 163.0, 117.0, 20.0 ],
|
|
"numoutlets" : 0,
|
|
"fontsize" : 12.0,
|
|
"id" : "obj-17",
|
|
"fontname" : "Arial",
|
|
"numinlets" : 1
|
|
}
|
|
|
|
}
|
|
],
|
|
"lines" : [ {
|
|
"patchline" : {
|
|
"source" : [ "obj-12", 0 ],
|
|
"destination" : [ "obj-14", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-11", 0 ],
|
|
"destination" : [ "obj-12", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-13", 0 ],
|
|
"destination" : [ "obj-14", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ 363.5, 260.5, 238.5, 260.5 ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-19", 0 ],
|
|
"destination" : [ "obj-14", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ 343.5, 288.5, 238.5, 288.5 ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-21", 0 ],
|
|
"destination" : [ "obj-14", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ 321.5, 311.5, 238.5, 311.5 ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-30", 0 ],
|
|
"destination" : [ "obj-21", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-30", 1 ],
|
|
"destination" : [ "obj-19", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-11", 0 ],
|
|
"destination" : [ "obj-30", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ 238.5, 191.0, 321.5, 191.0 ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-29", 2 ],
|
|
"destination" : [ "obj-3", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-29", 0 ],
|
|
"destination" : [ "obj-23", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-29", 1 ],
|
|
"destination" : [ "obj-22", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-14", 0 ],
|
|
"destination" : [ "obj-50", 1 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-50", 0 ],
|
|
"destination" : [ "obj-31", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-48", 0 ],
|
|
"destination" : [ "obj-53", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-53", 0 ],
|
|
"destination" : [ "obj-50", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ 394.5, 426.0, 203.5, 426.0 ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-14", 0 ],
|
|
"destination" : [ "obj-54", 1 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ 238.5, 342.0, 429.5, 342.0 ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-54", 0 ],
|
|
"destination" : [ "obj-48", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-62", 0 ],
|
|
"destination" : [ "obj-39", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-3", 0 ],
|
|
"destination" : [ "obj-62", 2 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-22", 0 ],
|
|
"destination" : [ "obj-62", 1 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-23", 0 ],
|
|
"destination" : [ "obj-62", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-53", 0 ],
|
|
"destination" : [ "obj-55", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-55", 0 ],
|
|
"destination" : [ "obj-54", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ 394.5, 459.0, 453.0, 459.0, 453.0, 351.0, 394.5, 351.0 ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-30", 0 ],
|
|
"destination" : [ "obj-57", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-57", 0 ],
|
|
"destination" : [ "obj-53", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ 319.5, 401.0, 394.5, 401.0 ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-35", 0 ],
|
|
"destination" : [ "obj-14", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ 203.5, 542.0, 167.0, 542.0, 167.0, 300.0, 238.5, 300.0 ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-35", 1 ],
|
|
"destination" : [ "obj-29", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-31", 0 ],
|
|
"destination" : [ "obj-35", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-6", 0 ],
|
|
"destination" : [ "obj-9", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-53", 0 ],
|
|
"destination" : [ "obj-6", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ 394.5, 431.5, 348.5, 431.5 ]
|
|
}
|
|
|
|
}
|
|
, {
|
|
"patchline" : {
|
|
"source" : [ "obj-9", 0 ],
|
|
"destination" : [ "obj-14", 0 ],
|
|
"hidden" : 0,
|
|
"midpoints" : [ ]
|
|
}
|
|
|
|
}
|
|
]
|
|
}
|
|
|
|
|
|
*/
|