109 lines
2.8 KiB
Makefile
109 lines
2.8 KiB
Makefile
# Makefile for ATmegaBOOT
|
|
# E.Lins, 18.7.2005
|
|
# $Id$
|
|
#
|
|
# Instructions
|
|
#
|
|
# To make bootloader .hex file:
|
|
# make diecimila
|
|
# make lilypad
|
|
# make ng
|
|
# etc...
|
|
#
|
|
# To burn bootloader .hex file:
|
|
# make diecimila_isp
|
|
# make lilypad_isp
|
|
# make ng_isp
|
|
# etc...
|
|
|
|
# program name should not be changed...
|
|
PROGRAM = ATmegaBOOT_168
|
|
|
|
# enter the parameters for the avrdude isp tool
|
|
ISPTOOL = stk500v2
|
|
ISPPORT = usb
|
|
ISPSPEED = -b 115200
|
|
|
|
MCU_TARGET = atmega168
|
|
LDSECTION = --section-start=.text=0x3800
|
|
|
|
# the efuse should really be 0xf8; since, however, only the lower
|
|
# three bits of that byte are used on the atmega168, avrdude gets
|
|
# confused if you specify 1's for the higher bits, see:
|
|
# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
|
|
#
|
|
# similarly, the lock bits should be 0xff instead of 0x3f (to
|
|
# unlock the bootloader section) and 0xcf instead of 0x0f (to
|
|
# lock it), but since the high two bits of the lock byte are
|
|
# unused, avrdude would get confused.
|
|
|
|
ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
|
|
-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
|
|
ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
|
|
-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
|
|
|
|
STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
|
|
STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
|
|
-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt
|
|
STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt
|
|
|
|
|
|
OBJ = $(PROGRAM).o
|
|
OPTIMIZE = -O2
|
|
|
|
DEFS =
|
|
LIBS =
|
|
|
|
CC = avr-gcc
|
|
|
|
# Override is only needed by avr-lib build system.
|
|
|
|
override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
|
|
override LDFLAGS = -Wl,$(LDSECTION)
|
|
#override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION)
|
|
|
|
OBJCOPY = avr-objcopy
|
|
OBJDUMP = avr-objdump
|
|
|
|
all:
|
|
|
|
atmega328_bt: TARGET = atmega328_bt
|
|
atmega328_bt: MCU_TARGET = atmega328p
|
|
atmega328_bt: AVR_FREQ = 16000000L
|
|
atmega328_bt: LDSECTION = --section-start=.text=0x7000
|
|
atmega328_bt: $(PROGRAM)_atmega328_bt.hex
|
|
|
|
atmega328_bt_isp: atmega328_bt
|
|
atmega328_bt_isp: TARGET = atmega328_bt
|
|
atmega328_bt_isp: MCU_TARGET = atmega328p
|
|
atmega328_bt_isp: HFUSE = D8
|
|
atmega328_bt_isp: LFUSE = FF
|
|
atmega328_bt_isp: EFUSE = 05
|
|
atmega328_bt_isp: isp
|
|
|
|
isp: $(TARGET)
|
|
$(ISPFUSES)
|
|
$(ISPFLASH)
|
|
|
|
isp-stk500: $(PROGRAM)_$(TARGET).hex
|
|
$(STK500-1)
|
|
$(STK500-2)
|
|
|
|
%.elf: $(OBJ)
|
|
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
|
|
|
|
clean:
|
|
rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
|
|
|
|
%.lst: %.elf
|
|
$(OBJDUMP) -h -S $< > $@
|
|
|
|
%.hex: %.elf
|
|
$(OBJCOPY) -j .text -j .data -O ihex $< $@
|
|
|
|
%.srec: %.elf
|
|
$(OBJCOPY) -j .text -j .data -O srec $< $@
|
|
|
|
%.bin: %.elf
|
|
$(OBJCOPY) -j .text -j .data -O binary $< $@
|
|
|