neingeist
/
arduinisten
Archived
1
0
Fork 0
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.

443 lines
13 KiB
C++

/*
Firmata.cpp - Firmata library
Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
See file LICENSE.txt for further informations on licensing terms.
*/
//******************************************************************************
//* Includes
//******************************************************************************
#include "WProgram.h"
#include "HardwareSerial.h"
#include "Firmata.h"
extern "C" {
#include <string.h>
#include <stdlib.h>
}
//******************************************************************************
//* Support Functions
//******************************************************************************
void sendValueAsTwo7bitBytes(int value)
{
Serial.print(value & B01111111, BYTE); // LSB
Serial.print(value >> 7 & B01111111, BYTE); // MSB
}
void startSysex(void)
{
Serial.print(START_SYSEX, BYTE);
}
void endSysex(void)
{
Serial.print(END_SYSEX, BYTE);
}
//******************************************************************************
//* Constructors
//******************************************************************************
FirmataClass::FirmataClass(void)
{
firmwareVersionCount = 0;
systemReset();
}
//******************************************************************************
//* Public Methods
//******************************************************************************
/* begin method for overriding default serial bitrate */
void FirmataClass::begin(void)
{
begin(57600);
}
/* begin method for overriding default serial bitrate */
void FirmataClass::begin(long speed)
{
#if defined(__AVR_ATmega128__) // Wiring
Serial.begin((uint32_t)speed);
#else
Serial.begin(speed);
#endif
blinkVersion();
delay(300);
printVersion();
printFirmwareVersion();
}
// output the protocol version message to the serial port
void FirmataClass::printVersion(void) {
Serial.print(REPORT_VERSION, BYTE);
Serial.print(FIRMATA_MAJOR_VERSION, BYTE);
Serial.print(FIRMATA_MINOR_VERSION, BYTE);
}
void FirmataClass::blinkVersion(void)
{
// flash the pin with the protocol version
pinMode(VERSION_BLINK_PIN,OUTPUT);
pin13strobe(FIRMATA_MAJOR_VERSION, 200, 400);
delay(300);
pin13strobe(2,1,4); // separator, a quick burst
delay(300);
pin13strobe(FIRMATA_MINOR_VERSION, 200, 400);
}
void FirmataClass::printFirmwareVersion(void)
{
byte i;
if(firmwareVersionCount) { // make sure that the name has been set before reporting
startSysex();
Serial.print(REPORT_FIRMWARE, BYTE);
Serial.print(firmwareVersionVector[0]); // major version number
Serial.print(firmwareVersionVector[1]); // minor version number
for(i=2; i<firmwareVersionCount; ++i) {
sendValueAsTwo7bitBytes(firmwareVersionVector[i]);
}
endSysex();
}
}
void FirmataClass::setFirmwareNameAndVersion(const char *name, byte major, byte minor)
{
const char *filename;
char *extension;
// parse out ".cpp" and "applet/" that comes from using __FILE__
extension = strstr(name, ".cpp");
filename = strrchr(name, '/') + 1; //points to slash, +1 gets to start of filename
// add two bytes for version numbers
if(extension && filename) {
firmwareVersionCount = extension - filename + 2;
} else {
firmwareVersionCount = strlen(name) + 2;
filename = name;
}
firmwareVersionVector = (byte *) malloc(firmwareVersionCount);
firmwareVersionVector[firmwareVersionCount] = 0;
firmwareVersionVector[0] = major;
firmwareVersionVector[1] = minor;
strncpy((char*)firmwareVersionVector + 2, filename, firmwareVersionCount - 2);
// alas, no snprintf on Arduino
// snprintf(firmwareVersionVector, MAX_DATA_BYTES, "%c%c%s",
// (char)major, (char)minor, firmwareVersionVector);
}
//------------------------------------------------------------------------------
// Serial Receive Handling
int FirmataClass::available(void)
{
return Serial.available();
}
void FirmataClass::processSysexMessage(void)
{
switch(storedInputData[0]) { //first byte in buffer is command
case REPORT_FIRMWARE:
printFirmwareVersion();
break;
case STRING_DATA:
if(currentStringCallback) {
byte bufferLength = (sysexBytesRead - 1) / 2;
char *buffer = (char*)malloc(bufferLength * sizeof(char));
byte i = 1;
byte j = 0;
while(j < bufferLength) {
buffer[j] = (char)storedInputData[i];
i++;
buffer[j] += (char)(storedInputData[i] << 7);
i++;
j++;
}
(*currentStringCallback)(buffer);
}
break;
default:
if(currentSysexCallback)
(*currentSysexCallback)(storedInputData[0], sysexBytesRead - 1, storedInputData + 1);
}
}
void FirmataClass::processInput(void)
{
int inputData = Serial.read(); // this is 'int' to handle -1 when no data
int command;
// TODO make sure it handles -1 properly
if (parsingSysex) {
if(inputData == END_SYSEX) {
//stop sysex byte
parsingSysex = false;
//fire off handler function
processSysexMessage();
} else {
//normal data byte - add to buffer
storedInputData[sysexBytesRead] = inputData;
sysexBytesRead++;
}
} else if( (waitForData > 0) && (inputData < 128) ) {
waitForData--;
storedInputData[waitForData] = inputData;
if( (waitForData==0) && executeMultiByteCommand ) { // got the whole message
switch(executeMultiByteCommand) {
case ANALOG_MESSAGE:
if(currentAnalogCallback) {
(*currentAnalogCallback)(multiByteChannel,
(storedInputData[0] << 7)
+ storedInputData[1]);
}
break;
case DIGITAL_MESSAGE:
if(currentDigitalCallback) {
(*currentDigitalCallback)(multiByteChannel,
(storedInputData[0] << 7)
+ storedInputData[1]);
}
break;
case SET_PIN_MODE:
if(currentPinModeCallback)
(*currentPinModeCallback)(storedInputData[1], storedInputData[0]);
break;
case REPORT_ANALOG:
if(currentReportAnalogCallback)
(*currentReportAnalogCallback)(multiByteChannel,storedInputData[0]);
break;
case REPORT_DIGITAL:
if(currentReportDigitalCallback)
(*currentReportDigitalCallback)(multiByteChannel,storedInputData[0]);
break;
}
executeMultiByteCommand = 0;
}
} else {
// remove channel info from command byte if less than 0xF0
if(inputData < 0xF0) {
command = inputData & 0xF0;
multiByteChannel = inputData & 0x0F;
} else {
command = inputData;
// commands in the 0xF* range don't use channel data
}
switch (command) {
case ANALOG_MESSAGE:
case DIGITAL_MESSAGE:
case SET_PIN_MODE:
waitForData = 2; // two data bytes needed
executeMultiByteCommand = command;
break;
case REPORT_ANALOG:
case REPORT_DIGITAL:
waitForData = 1; // two data bytes needed
executeMultiByteCommand = command;
break;
case START_SYSEX:
parsingSysex = true;
sysexBytesRead = 0;
break;
case SYSTEM_RESET:
systemReset();
break;
case REPORT_VERSION:
Firmata.printVersion();
break;
}
}
}
//------------------------------------------------------------------------------
// Serial Send Handling
// send an analog message
void FirmataClass::sendAnalog(byte pin, int value)
{
// pin can only be 0-15, so chop higher bits
Serial.print(ANALOG_MESSAGE | (pin & 0xF), BYTE);
sendValueAsTwo7bitBytes(value);
}
// send a single digital pin in a digital message
void FirmataClass::sendDigital(byte pin, int value)
{
/* TODO add single pin digital messages to the protocol, this needs to
* track the last digital data sent so that it can be sure to change just
* one bit in the packet. This is complicated by the fact that the
* numbering of the pins will probably differ on Arduino, Wiring, and
* other boards. The DIGITAL_MESSAGE sends 14 bits at a time, but it is
* probably easier to send 8 bit ports for any board with more than 14
* digital pins.
*/
// TODO: the digital message should not be sent on the serial port every
// time sendDigital() is called. Instead, it should add it to an int
// which will be sent on a schedule. If a pin changes more than once
// before the digital message is sent on the serial port, it should send a
// digital message for each change.
// if(value == 0)
// sendDigitalPortPair();
}
// send 14-bits in a single digital message (protocol v1)
// send an 8-bit port in a single digital message (protocol v2)
void FirmataClass::sendDigitalPort(byte portNumber, int portData)
{
Serial.print(DIGITAL_MESSAGE | (portNumber & 0xF),BYTE);
Serial.print((byte)portData % 128, BYTE); // Tx bits 0-6
Serial.print(portData >> 7, BYTE); // Tx bits 7-13
}
void FirmataClass::sendSysex(byte command, byte bytec, byte* bytev)
{
byte i;
startSysex();
Serial.print(command, BYTE);
for(i=0; i<bytec; i++) {
sendValueAsTwo7bitBytes(bytev[i]);
}
endSysex();
}
void FirmataClass::sendString(byte command, const char* string)
{
sendSysex(command, strlen(string), (byte *)string);
}
// send a string as the protocol string type
void FirmataClass::sendString(const char* string)
{
sendString(STRING_DATA, string);
}
// Internal Actions/////////////////////////////////////////////////////////////
// generic callbacks
void FirmataClass::attach(byte command, callbackFunction newFunction)
{
switch(command) {
case ANALOG_MESSAGE: currentAnalogCallback = newFunction; break;
case DIGITAL_MESSAGE: currentDigitalCallback = newFunction; break;
case REPORT_ANALOG: currentReportAnalogCallback = newFunction; break;
case REPORT_DIGITAL: currentReportDigitalCallback = newFunction; break;
case SET_PIN_MODE: currentPinModeCallback = newFunction; break;
}
}
void FirmataClass::attach(byte command, systemResetCallbackFunction newFunction)
{
switch(command) {
case SYSTEM_RESET: currentSystemResetCallback = newFunction; break;
}
}
void FirmataClass::attach(byte command, stringCallbackFunction newFunction)
{
switch(command) {
case STRING_DATA: currentStringCallback = newFunction; break;
}
}
void FirmataClass::attach(byte command, sysexCallbackFunction newFunction)
{
currentSysexCallback = newFunction;
}
void FirmataClass::detach(byte command)
{
switch(command) {
case SYSTEM_RESET: currentSystemResetCallback = NULL; break;
case STRING_DATA: currentStringCallback = NULL; break;
case START_SYSEX: currentSysexCallback = NULL; break;
default:
attach(command, (callbackFunction)NULL);
}
}
// sysex callbacks
/*
* this is too complicated for analogReceive, but maybe for Sysex?
void FirmataClass::attachSysex(sysexFunction newFunction)
{
byte i;
byte tmpCount = analogReceiveFunctionCount;
analogReceiveFunction* tmpArray = analogReceiveFunctionArray;
analogReceiveFunctionCount++;
analogReceiveFunctionArray = (analogReceiveFunction*) calloc(analogReceiveFunctionCount, sizeof(analogReceiveFunction));
for(i = 0; i < tmpCount; i++) {
analogReceiveFunctionArray[i] = tmpArray[i];
}
analogReceiveFunctionArray[tmpCount] = newFunction;
free(tmpArray);
}
*/
//******************************************************************************
//* Private Methods
//******************************************************************************
// resets the system state upon a SYSTEM_RESET message from the host software
void FirmataClass::systemReset(void)
{
byte i;
waitForData = 0; // this flag says the next serial input will be data
executeMultiByteCommand = 0; // execute this after getting multi-byte data
multiByteChannel = 0; // channel data for multiByteCommands
for(i=0; i<MAX_DATA_BYTES; i++) {
storedInputData[i] = 0;
}
parsingSysex = false;
sysexBytesRead = 0;
if(currentSystemResetCallback)
(*currentSystemResetCallback)();
//flush(); //TODO uncomment when Firmata is a subclass of HardwareSerial
}
// =============================================================================
// used for flashing the pin for the version number
void FirmataClass::pin13strobe(int count, int onInterval, int offInterval)
{
byte i;
pinMode(VERSION_BLINK_PIN, OUTPUT);
for(i=0; i<count; i++) {
delay(offInterval);
digitalWrite(VERSION_BLINK_PIN, HIGH);
delay(onInterval);
digitalWrite(VERSION_BLINK_PIN, LOW);
}
}
// make one instance for the user to use
FirmataClass Firmata;