You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
41 lines
1013 B
Plaintext
41 lines
1013 B
Plaintext
/*
|
|
Blink
|
|
|
|
Turns on an LED on for one second, then off for one second, repeatedly.
|
|
|
|
The circuit:
|
|
* LED connected from digital pin 13 to ground.
|
|
|
|
* Note: On most Arduino boards, there is already an LED on the board
|
|
connected to pin 13, so you don't need any extra components for this example.
|
|
|
|
|
|
Created 1 June 2005
|
|
By David Cuartielles
|
|
|
|
http://arduino.cc/en/Tutorial/Blink
|
|
|
|
based on an orginal by H. Barragan for the Wiring i/o board
|
|
|
|
*/
|
|
|
|
int ledPin = 13; // LED connected to digital pin 13
|
|
|
|
// The setup() method runs once, when the sketch starts
|
|
|
|
void setup() {
|
|
// initialize the digital pin as an output:
|
|
pinMode(ledPin, OUTPUT);
|
|
}
|
|
|
|
// the loop() method runs over and over again,
|
|
// as long as the Arduino has power
|
|
|
|
void loop()
|
|
{
|
|
digitalWrite(ledPin, HIGH); // set the LED on
|
|
delay(1000); // wait for a second
|
|
digitalWrite(ledPin, LOW); // set the LED off
|
|
delay(1000); // wait for a second
|
|
}
|