You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
eynollah/README.md

131 lines
10 KiB
Markdown

# Eynollah
> Document Layout Analysis
4 years ago
![](https://user-images.githubusercontent.com/952378/102350683-8a74db80-3fa5-11eb-8c7e-f743f7d6eae2.jpg)
4 years ago
## Introduction
This tool performs document layout analysis (segmentation) from image data and returns the results as [PAGE-XML](https://github.com/PRImA-Research-Lab/PAGE-XML).
It can currently detect the following layout classes/elements:
* [Border](https://ocr-d.de/en/gt-guidelines/pagexml/pagecontent_xsd_Complex_Type_pc_BorderType.html)
* [Textregion](https://ocr-d.de/en/gt-guidelines/pagexml/pagecontent_xsd_Complex_Type_pc_TextRegionType.html)
* [Textline](https://ocr-d.de/en/gt-guidelines/pagexml/pagecontent_xsd_Complex_Type_pc_TextLineType.html)
* [Image](https://ocr-d.de/en/gt-guidelines/pagexml/pagecontent_xsd_Complex_Type_pc_ImageRegionType.html)
* [Separator](https://ocr-d.de/en/gt-guidelines/pagexml/pagecontent_xsd_Complex_Type_pc_SeparatorRegionType.html)
* [Marginalia](https://ocr-d.de/en/gt-guidelines/trans/lyMarginalie.html)
* [Initial (Drop Capital)](https://ocr-d.de/en/gt-guidelines/trans/lyInitiale.html)
In addition, the tool can be used to detect the _[ReadingOrder](https://ocr-d.de/en/gt-guidelines/trans/lyLeserichtung.html)_ of regions. The final goal is to feed the output to an OCR model.
The tool uses a combination of various models and heuristics (see flowchart below for the different stages and how they interact):
* [Border detection](https://github.com/qurator-spk/eynollah#border-detection)
* [Layout detection](https://github.com/qurator-spk/eynollah#layout-detection)
* [Textline detection](https://github.com/qurator-spk/eynollah#textline-detection)
* [Image enhancement](https://github.com/qurator-spk/eynollah#Image_enhancement)
* [Scale classification](https://github.com/qurator-spk/eynollah#Scale_classification)
* [Heuristic methods](https://https://github.com/qurator-spk/eynollah#heuristic-methods)
4 years ago
4 years ago
The first three stages are based on [pixel-wise segmentation](https://github.com/qurator-spk/sbb_pixelwise_segmentation).
4 years ago
![](https://user-images.githubusercontent.com/952378/100619946-1936f680-331e-11eb-9297-6e8b4cab3c16.png)
4 years ago
## Border detection
4 years ago
For the purpose of text recognition (OCR) and in order to avoid noise being introduced from texts outside the printspace, one first needs to detect the border of the printed frame. This is done by a binary pixel-wise-segmentation model trained on a dataset of 2,000 documents where about 1,200 of them come from the [dhSegment](https://github.com/dhlab-epfl/dhSegment/) project (you can download the dataset from [here](https://github.com/dhlab-epfl/dhSegment/releases/download/v0.2/pages.zip)) and the remainder having been annotated in SBB. For border detection, the model needs to be fed with the whole image at once rather than separated in patches.
4 years ago
## Layout detection
4 years ago
As a next step, text regions need to be identified by means of layout detection. Again a pixel-wise segmentation model was trained on 131 labeled images from the SBB digital collections, including some data augmentation. Since the target of this tool are historical documents, we consider as main region types text regions, separators, images, tables and background - each with their own subclasses, e.g. in the case of text regions, subclasses like header/heading, drop capital, main body text etc. While it would be desirable to detect and classify each of these classes in a granular way, there are also limitations due to having a suitably large and balanced training set. Accordingly, the current version of this tool is focussed on the main region types background, text region, image and separator.
4 years ago
## Textline detection
4 years ago
In a subsequent step, binary pixel-wise segmentation is used again to classify pixels in a document that constitute textlines. For textline segmentation, a model was initially trained on documents with only one column/block of text and some augmentation with regard to scaling. By fine-tuning the parameters also for multi-column documents, additional training data was produced that resulted in a much more robust textline detection model.
4 years ago
## Image enhancement
4 years ago
This is an image to image model which input was low quality of an image and label was actually the original image. For this one we did not have any GT, so we decreased the quality of documents in SBB and then feed them into model.
4 years ago
## Scale classification
This is simply an image classifier which classifies images based on their scales or better to say based on their number of columns.
## Heuristic methods
Some heuristic methods are also employed to further improve the model predictions:
4 years ago
* After border detection, the largest contour is determined by a bounding box, and the image cropped to these coordinates.
4 years ago
* For text region detection, the image is scaled up to make it easier for the model to detect background space between text regions.
4 years ago
* A minimum area is defined for text regions in relation to the overall image dimensions, so that very small regions that are noise can be filtered out.
4 years ago
* Deskewing is applied on the text region level (due to regions having different degrees of skew) in order to improve the textline segmentation result.
* After deskewing, a calculation of the pixel distribution on the X-axis allows the separation of textlines (foreground) and background pixels.
* Finally, using the derived coordinates, bounding boxes are determined for each textline.
## Installation
`pip install .` or
`pip install . -e` for editable installation
Alternatively, you can also use `make` with these targets:
`make install` or
`make install-dev` for editable installation
4 years ago
### Models
In order to run this tool you also need trained models. You can download our pretrained models from [qurator-data.de](https://qurator-data.de/eynollah/).
4 years ago
Alternatively, running `make models` will download and extract models to `$(PWD)/models_eynollah`.
4 years ago
## Usage
The basic command-line interface can be called like this:
```sh
eynollah \
-i <image file name> \
-o <directory to write output xml or enhanced image> \
-m <directory of models> \
-fl <if true, the tool will perform full layout analysis> \
-ae <if true, the tool will resize and enhance the image and produce the resulting image as output. The rescaled and enhanced image will be saved in output directory> \
-as <if true, the tool will check whether the document needs rescaling or not> \
-cl <if true, the tool will extract the contours of curved textlines instead of rectangle bounding boxes> \
-si <if a directory is given here, the tool will output image regions inside documents there> \
-sd <if a directory is given, deskewed image will be saved there> \
-sa <if a directory is given, all plots needed for documentation will be saved there> \
-tab <if true, this tool will try to detect tables> \
-ib <in general, eynollah uses RGB as input but if the input document is strongly dark, bright or for any other reason you can turn binarized input on. This option does not mean that you have to provide a binary image, otherwise this means that the tool itself will binarized the RGB input document> \
-ho <if true, this tool would ignore headers role in reading order detection> \
-sl <if a directory is given, plot of layout will be saved there> \
-ep <if true, the tool will be enabled to save desired plot. This should be true alongside with -sl, -sd, -sa , -si or -ae options>
```
4 years ago
The tool does accept and works better on original images (RGB format) than binarized images.
4 years ago
### `--full-layout` vs `--no-full-layout`
Here are the difference in elements detected depending on the `--full-layout`/`--no-full-layout` command line flags:
| | `--full-layout` | `--no-full-layout` |
| --- | --- | --- |
| reading order | x | x |
| header regions | x | - |
| text regions | x | x |
| text regions / text line | x | x |
| drop-capitals | x | - |
| marginals | x | x |
| marginals / text line | x | x |
| image region | x | x |
### How to use
4 years ago
4 years ago
First, this model makes use of up to 9 trained models which are responsible for different operations like size detection, column classification, image enhancement, page extraction, main layout detection, full layout detection and textline detection.That does not mean that all 9 models are always required for every document. Based on the document characteristics and parameters specified, different scenarios can be applied.
4 years ago
* If none of the parameters is set to `true`, the tool will perform a layout detection of main regions (background, text, images, separators and marginals). An advantage of this tool is that it tries to extract main text regions separately as much as possible.
4 years ago
4 years ago
* If you set `-ae` (**a**llow image **e**nhancement) parameter to `true`, the tool will first check the ppi (pixel-per-inch) of the image and when it is less than 300, the tool will resize it and only then image enhancement will occur. Image enhancement can also take place without this option, but by setting this option to `true`, the layout xml data (e.g. coordinates) will be based on the resized and enhanced image instead of the original image.
4 years ago
4 years ago
* For some documents, while the quality is good, their scale is very large, and the performance of tool decreases. In such cases you can set `-as` (**a**llow **s**caling) to `true`. With this option enabled, the tool will try to rescale the image and only then the layout detection process will begin.
4 years ago
* If you care about drop capitals (initials) and headings, you can set `-fl` (**f**ull **l**ayout) to `true`. With this setting, the tool can currently distinguish 7 document layout classes/elements.
4 years ago
4 years ago
* In cases where the document includes curved headers or curved lines, rectangular bounding boxes for textlines will not be a great option. In such cases it is strongly recommended setting the flag `-cl` (**c**urved **l**ines) to `true` to find contours of curved lines instead of rectangular bounding boxes. Be advised that enabling this option increases the processing time of the tool.
4 years ago
* To crop and save image regions inside the document, set the parameter `-si` (**s**ave **i**mages) to true and provide a directory path to store the extracted images.
4 years ago
4 years ago
* This tool is actively being developed. If problems occur, or the performance does not meet your expectations, we welcome your feedback via [issues](https://github.com/qurator-spk/eynollah/issues).